MNY961JH
Part of Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer.
Literature
Specifications
- Elastomer Material
- Silicone, Viton, Buna-N, EPDM
- End #1 Adapter
- 020 O-Ring
- End #2 Adapter
- Fin Adapter
- Micron Rating
- 0.65 µm
- Nominal Cartridge Length
- 25.4 cm / 10 in
Integrity Testing
≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
Note
Trademark of General Electric Company; may be registered in one or more countries.
Typical Applications
MNY filters have excellent chemical compatibility making them the ideal choice for a broad range of applications such as high purity water, strong solvents, photoresists and other critical process fluid systems. Typical applications include:
- Filtration of pharmaceuticals intermediates
- Filtration of positive photoresists
- Final filtration of beverages
General Properties
Memtrex NY filters are available the following absolute pore size micron ratings: 0.1, 0.2, 0.45, 0.65 and 1.0 µm. Tables 1, 2, 3, 4 and 5 show further details on materials of construction, dimensions, operational limits, integrity testing and flow performance.
Additional Information
- Memtrex NY filters may be autoclaved or in situ steam sterilized (up to 257°F [125°C], 30-minute cycles) for a maximum accumulated exposure of 10 hours. Alternately, the filters may be sanitized with compatible chemical agents.
- GE certifies that the material contained in its Memtrex NY pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR. For further information, contact GE technical services. Memtrex NY filters meet the test criteria for USP class VI-121°C Plastics.
- Aqueous extracts from Memtrex NY filters contain less that 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues.
- GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility.
Line Specifications
- Core and Cage
- Polypropylene
- Effective Filtration Area
- 7 ft² / 1 m²
- Endcaps and Adapters
- Polyester
- Maximum Forward Differential Pressure @ 70°F (21°C)
- 4.1 bar / 60 psi
- Maximum Operating Temperature at 10 psid (0.7 bar) in Water
- 82 °C / 180 °F
- Maximum Reverse Differential Pressure @ 70°F (21°C)
- 2.1 bar / 30 psi
- Media Material
- 2 Layers of Nylon 66 Membrane (prefilter layer over final layer)
- Nominal Inside Diameter
- 1.25 in / 31 mm
- Nominal Outside Diameter
- 2.75 in / 70 mm
- Support Layers
- Polyester Microfiber
- Type
- MNY
See more parts in Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.