Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane

Product CatalogPleated Filter Cartridges

Memtrex NY (MNY) filters (Figure 1) are uniquely constructed for superior performance with a serial membrane layer design that incorporates a large pore-size membrane layer upstream of the final membrane layer. The first membrane acts like a prefilter to increase the life and efficiency of the cartridge. It is also highly effective in retaining difficult contaminants such as gelatinous particles. The final membrane layer ensures consistent retention characteristics.

MNY filters are designed to ensure maximum downstream cleanliness. GE Water & Process Technologies Nylon 66 membranes are naturally hydrophilic, non-shedding and do not contain leachable wetting agents. Thermoplastic sealing technologies are used in the cartridge construction eliminating the need for potentially contaminating adhesives. Each cartridge is manufactured under strict production control and is individually integrity tested. GE is your complete source for filters, crossflow membranes, housings and other filtration equipment.

Note

Trademark of General Electric Company; may be registered in one or more countries.

Typical Applications

MNY filters have excellent chemical compatibility making them the ideal choice for a broad range of applications such as high purity water, strong solvents, photoresists and other critical process fluid systems. Typical applications include:

Filtration of pharmaceuticals intermediates
Filtration of positive photoresists
Final filtration of beverages

General Properties

Memtrex NY filters are available the following absolute pore size micron ratings: 0.1, 0.2, 0.45, 0.65 and 1.0 µm. Tables 1, 2, 3, 4 and 5 show further details on materials of construction, dimensions, operational limits, integrity testing and flow performance.

Additional Information

Memtrex NY filters may be autoclaved or in situ steam sterilized (up to 257°F [125°C], 30-minute cycles) for a maximum accumulated exposure of 10 hours. Alternately, the filters may be sanitized with compatible chemical agents.
GE certifies that the material contained in its Memtrex NY pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR. For further information, contact GE technical services. Memtrex NY filters meet the test criteria for USP class VI-121°C Plastics.
Aqueous extracts from Memtrex NY filters contain less that 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues.
GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility.

Request a Quote

Literature

Specifications

Core and Cage: Polypropylene
Effective Filtration Area: 7 ft² / 1 m²
Endcaps and Adapters: Polyester
Maximum Forward Differential Pressure @ 70°F (21°C): 4.1 bar / 60 psi
Maximum Operating Temperature at 10 psid (0.7 bar) in Water: 82 °C / 180 °F
Maximum Reverse Differential Pressure @ 70°F (21°C): 2.1 bar / 30 psi
Media Material: 2 Layers of Nylon 66 Membrane (prefilter layer over final layer)
Nominal Inside Diameter: 1.25 in / 31 mm
Nominal Outside Diameter: 2.75 in / 70 mm
Support Layers: Polyester Microfiber
Type: MNY

Part Numbers

800 parts available

Part Number	Micron Rating (µ / µm)	Nominal Cartridge Length (cm / in)	End #1 Adapter	End #2 Adapter	Elastomer Material	Integrity Testing (bar / psi / psig)
MNY911AA	0.1 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911AB	0.1 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911AC	0.1 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911AG	0.1 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911AH	0.1 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911BA	0.1 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911BB	0.1 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911BC	0.1 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911BG	0.1 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911BH	0.1 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911CA	0.1 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911CB	0.1 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911CC	0.1 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911CG	0.1 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911CH	0.1 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911EA	0.1 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911EB	0.1 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911EC	0.1 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911EG	0.1 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911EH	0.1 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911FA	0.1 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911FB	0.1 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911FC	0.1 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911FG	0.1 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911FH	0.1 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911JA	0.1 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911JB	0.1 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911JC	0.1 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911JG	0.1 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911JH	0.1 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911QA	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911QB	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911QC	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911QG	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911QH	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911ZA	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911ZB	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911ZC	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911ZG	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY911ZH	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912AA	0.1 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912AB	0.1 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912AC	0.1 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912AG	0.1 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912AH	0.1 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912BA	0.1 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912BB	0.1 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912BC	0.1 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912BG	0.1 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912BH	0.1 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912CA	0.1 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912CB	0.1 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912CC	0.1 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912CG	0.1 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912CH	0.1 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912EA	0.1 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912EB	0.1 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912EC	0.1 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912EG	0.1 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912EH	0.1 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912FA	0.1 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912FB	0.1 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912FC	0.1 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912FG	0.1 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912FH	0.1 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912JA	0.1 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912JB	0.1 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912JC	0.1 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912JG	0.1 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912JH	0.1 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912QA	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912QB	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912QC	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912QG	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912QH	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912ZA	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912ZB	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912ZC	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912ZG	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY912ZH	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913AA	0.1 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913AB	0.1 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913AC	0.1 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913AG	0.1 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913AH	0.1 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913BA	0.1 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913BB	0.1 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913BC	0.1 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913BG	0.1 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913BH	0.1 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913CA	0.1 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913CB	0.1 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913CC	0.1 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913CG	0.1 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913CH	0.1 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913EA	0.1 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913EB	0.1 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913EC	0.1 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913EG	0.1 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913EH	0.1 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913FA	0.1 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913FB	0.1 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913FC	0.1 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913FG	0.1 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913FH	0.1 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913JA	0.1 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913JB	0.1 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913JC	0.1 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913JG	0.1 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913JH	0.1 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913QA	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913QB	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913QC	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913QG	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913QH	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913ZA	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913ZB	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913ZC	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913ZG	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY913ZH	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914AA	0.1 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914AB	0.1 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914AC	0.1 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914AG	0.1 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914AH	0.1 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914BA	0.1 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914BB	0.1 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914BC	0.1 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914BG	0.1 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914BH	0.1 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914CA	0.1 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914CB	0.1 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914CC	0.1 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914CG	0.1 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914CH	0.1 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914EA	0.1 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914EB	0.1 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914EC	0.1 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914EG	0.1 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914EH	0.1 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914FA	0.1 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914FB	0.1 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914FC	0.1 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914FG	0.1 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914FH	0.1 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914JA	0.1 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914JB	0.1 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914JC	0.1 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914JG	0.1 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914JH	0.1 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914QA	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914QB	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914QC	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914QG	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914QH	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914ZA	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914ZB	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914ZC	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914ZG	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY914ZH	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.76 bar / ≤ 50 cc/min at 40 psig
MNY921AA	0.2 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921AB	0.2 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921AC	0.2 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921AG	0.2 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921AH	0.2 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921BA	0.2 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921BB	0.2 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921BC	0.2 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921BG	0.2 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921BH	0.2 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921CA	0.2 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921CB	0.2 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921CC	0.2 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921CG	0.2 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921CH	0.2 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921EA	0.2 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921EB	0.2 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921EC	0.2 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921EG	0.2 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921EH	0.2 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921FA	0.2 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921FB	0.2 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921FC	0.2 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921FG	0.2 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921FH	0.2 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921JA	0.2 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921JB	0.2 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921JC	0.2 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921JG	0.2 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921JH	0.2 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921QA	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921QB	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921QC	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921QG	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921QH	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921ZA	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921ZB	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921ZC	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921ZG	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY921ZH	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922AA	0.2 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922AB	0.2 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922AC	0.2 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922AG	0.2 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922AH	0.2 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922BA	0.2 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922BB	0.2 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922BC	0.2 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922BG	0.2 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922BH	0.2 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922CA	0.2 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922CB	0.2 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922CC	0.2 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922CG	0.2 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922CH	0.2 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922EA	0.2 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922EB	0.2 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922EC	0.2 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922EG	0.2 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922EH	0.2 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922FA	0.2 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922FB	0.2 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922FC	0.2 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922FG	0.2 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922FH	0.2 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922JA	0.2 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922JB	0.2 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922JC	0.2 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922JG	0.2 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922JH	0.2 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922QA	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922QB	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922QC	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922QG	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922QH	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922ZA	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922ZB	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922ZC	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922ZG	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY922ZH	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923AA	0.2 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923AB	0.2 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923AC	0.2 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923AG	0.2 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923AH	0.2 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923BA	0.2 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923BB	0.2 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923BC	0.2 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923BG	0.2 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923BH	0.2 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923CA	0.2 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923CB	0.2 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923CC	0.2 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923CG	0.2 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923CH	0.2 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923EA	0.2 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923EB	0.2 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923EC	0.2 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923EG	0.2 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923EH	0.2 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923FA	0.2 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923FB	0.2 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923FC	0.2 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923FG	0.2 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923FH	0.2 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923JA	0.2 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923JB	0.2 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923JC	0.2 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923JG	0.2 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923JH	0.2 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923QA	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923QB	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923QC	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923QG	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923QH	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923ZA	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923ZB	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923ZC	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923ZG	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY923ZH	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924AA	0.2 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924AB	0.2 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924AC	0.2 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924AG	0.2 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924AH	0.2 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924BA	0.2 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924BB	0.2 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924BC	0.2 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924BG	0.2 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924BH	0.2 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924CA	0.2 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924CB	0.2 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924CC	0.2 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924CG	0.2 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924CH	0.2 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924EA	0.2 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924EB	0.2 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924EC	0.2 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924EG	0.2 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924EH	0.2 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924FA	0.2 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924FB	0.2 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924FC	0.2 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924FG	0.2 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924FH	0.2 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924JA	0.2 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924JB	0.2 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924JC	0.2 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924JG	0.2 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924JH	0.2 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924QA	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924QB	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924QC	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924QG	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924QH	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924ZA	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924ZB	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924ZC	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924ZG	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY924ZH	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 2.07 bar / ≤ 50 cc/min at 30 psig
MNY941AA	0.45 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941AB	0.45 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941AC	0.45 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941AG	0.45 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941AH	0.45 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941BA	0.45 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941BB	0.45 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941BC	0.45 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941BG	0.45 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941BH	0.45 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941CA	0.45 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941CB	0.45 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941CC	0.45 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941CG	0.45 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941CH	0.45 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941EA	0.45 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941EB	0.45 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941EC	0.45 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941EG	0.45 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941EH	0.45 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941FA	0.45 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941FB	0.45 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941FC	0.45 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941FG	0.45 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941FH	0.45 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941JA	0.45 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941JB	0.45 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941JC	0.45 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941JG	0.45 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941JH	0.45 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941QA	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941QB	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941QC	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941QG	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941QH	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941ZA	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941ZB	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941ZC	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941ZG	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY941ZH	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942AA	0.45 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942AB	0.45 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942AC	0.45 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942AG	0.45 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942AH	0.45 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942BA	0.45 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942BB	0.45 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942BC	0.45 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942BG	0.45 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942BH	0.45 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942CA	0.45 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942CB	0.45 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942CC	0.45 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942CG	0.45 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942CH	0.45 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942EA	0.45 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942EB	0.45 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942EC	0.45 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942EG	0.45 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942EH	0.45 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942FA	0.45 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942FB	0.45 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942FC	0.45 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942FG	0.45 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942FH	0.45 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942JA	0.45 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942JB	0.45 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942JC	0.45 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942JG	0.45 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942JH	0.45 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942QA	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942QB	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942QC	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942QG	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942QH	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942ZA	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942ZB	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942ZC	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942ZG	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY942ZH	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943AA	0.45 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943AB	0.45 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943AC	0.45 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943AG	0.45 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943AH	0.45 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943BA	0.45 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943BB	0.45 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943BC	0.45 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943BG	0.45 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943BH	0.45 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943CA	0.45 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943CB	0.45 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943CC	0.45 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943CG	0.45 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943CH	0.45 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943EA	0.45 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943EB	0.45 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943EC	0.45 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943EG	0.45 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943EH	0.45 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943FA	0.45 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943FB	0.45 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943FC	0.45 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943FG	0.45 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943FH	0.45 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943JA	0.45 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943JB	0.45 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943JC	0.45 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943JG	0.45 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943JH	0.45 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943QA	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943QB	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943QC	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943QG	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943QH	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943ZA	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943ZB	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943ZC	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943ZG	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY943ZH	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944AA	0.45 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944AB	0.45 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944AC	0.45 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944AG	0.45 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944AH	0.45 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944BA	0.45 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944BB	0.45 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944BC	0.45 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944BG	0.45 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944BH	0.45 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944CA	0.45 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944CB	0.45 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944CC	0.45 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944CG	0.45 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944CH	0.45 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944EA	0.45 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944EB	0.45 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944EC	0.45 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944EG	0.45 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944EH	0.45 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944FA	0.45 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944FB	0.45 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944FC	0.45 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944FG	0.45 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944FH	0.45 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944JA	0.45 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944JB	0.45 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944JC	0.45 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944JG	0.45 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944JH	0.45 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944QA	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944QB	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944QC	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944QG	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944QH	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944ZA	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944ZB	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944ZC	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944ZG	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY944ZH	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 1.03 bar / ≤ 50 cc/min at 15 psig
MNY961AA	0.65 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961AB	0.65 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961AC	0.65 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961AG	0.65 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961AH	0.65 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961BA	0.65 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961BB	0.65 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961BC	0.65 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961BG	0.65 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961BH	0.65 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961CA	0.65 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961CB	0.65 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961CC	0.65 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961CG	0.65 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961CH	0.65 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961EA	0.65 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961EB	0.65 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961EC	0.65 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961EG	0.65 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961EH	0.65 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961FA	0.65 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961FB	0.65 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961FC	0.65 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961FG	0.65 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961FH	0.65 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961JA	0.65 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961JB	0.65 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961JC	0.65 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961JG	0.65 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961JH	0.65 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961QA	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961QB	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961QC	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961QG	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961QH	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961ZA	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961ZB	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961ZC	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961ZG	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY961ZH	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962AA	0.65 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962AB	0.65 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962AC	0.65 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962AG	0.65 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962AH	0.65 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962BA	0.65 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962BB	0.65 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962BC	0.65 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962BG	0.65 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962BH	0.65 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962CA	0.65 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962CB	0.65 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962CC	0.65 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962CG	0.65 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962CH	0.65 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962EA	0.65 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962EB	0.65 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962EC	0.65 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962EG	0.65 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962EH	0.65 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962FA	0.65 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962FB	0.65 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962FC	0.65 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962FG	0.65 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962FH	0.65 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962JA	0.65 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962JB	0.65 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962JC	0.65 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962JG	0.65 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962JH	0.65 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962QA	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962QB	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962QC	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962QG	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962QH	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962ZA	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962ZB	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962ZC	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962ZG	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY962ZH	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963AA	0.65 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963AB	0.65 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963AC	0.65 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963AG	0.65 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963AH	0.65 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963BA	0.65 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963BB	0.65 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963BC	0.65 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963BG	0.65 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963BH	0.65 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963CA	0.65 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963CB	0.65 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963CC	0.65 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963CG	0.65 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963CH	0.65 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963EA	0.65 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963EB	0.65 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963EC	0.65 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963EG	0.65 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963EH	0.65 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963FA	0.65 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963FB	0.65 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963FC	0.65 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963FG	0.65 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963FH	0.65 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963JA	0.65 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963JB	0.65 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963JC	0.65 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963JG	0.65 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963JH	0.65 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963QA	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963QB	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963QC	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963QG	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963QH	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963ZA	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963ZB	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963ZC	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963ZG	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY963ZH	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964AA	0.65 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964AB	0.65 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964AC	0.65 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964AG	0.65 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964AH	0.65 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964BA	0.65 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964BB	0.65 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964BC	0.65 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964BG	0.65 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964BH	0.65 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964CA	0.65 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964CB	0.65 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964CC	0.65 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964CG	0.65 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964CH	0.65 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964EA	0.65 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964EB	0.65 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964EC	0.65 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964EG	0.65 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964EH	0.65 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964FA	0.65 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964FB	0.65 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964FC	0.65 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964FG	0.65 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964FH	0.65 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964JA	0.65 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964JB	0.65 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964JC	0.65 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964JG	0.65 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964JH	0.65 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964QA	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964QB	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964QC	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964QG	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964QH	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964ZA	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964ZB	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964ZC	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964ZG	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY964ZH	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.83 bar / ≤ 50 cc/min at 12 psig
MNY011AA	1.0 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011AB	1.0 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011AC	1.0 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011AG	1.0 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011AH	1.0 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011BA	1.0 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011BB	1.0 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011BC	1.0 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011BG	1.0 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011BH	1.0 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011CA	1.0 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011CB	1.0 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011CC	1.0 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011CG	1.0 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011CH	1.0 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011EA	1.0 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011EB	1.0 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011EC	1.0 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011EG	1.0 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011EH	1.0 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011FA	1.0 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011FB	1.0 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011FC	1.0 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011FG	1.0 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011FH	1.0 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011JA	1.0 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011JB	1.0 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011JC	1.0 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011JG	1.0 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011JH	1.0 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011QA	1.0 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011QB	1.0 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011QC	1.0 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011QG	1.0 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011QH	1.0 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011ZA	1.0 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011ZB	1.0 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011ZC	1.0 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011ZG	1.0 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY011ZH	1.0 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012AA	1.0 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012AB	1.0 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012AC	1.0 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012AG	1.0 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012AH	1.0 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012BA	1.0 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012BB	1.0 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012BC	1.0 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012BG	1.0 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012BH	1.0 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012CA	1.0 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012CB	1.0 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012CC	1.0 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012CG	1.0 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012CH	1.0 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012EA	1.0 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012EB	1.0 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012EC	1.0 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012EG	1.0 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012EH	1.0 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012FA	1.0 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012FB	1.0 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012FC	1.0 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012FG	1.0 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012FH	1.0 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012JA	1.0 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012JB	1.0 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012JC	1.0 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012JG	1.0 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012JH	1.0 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012QA	1.0 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012QB	1.0 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012QC	1.0 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012QG	1.0 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012QH	1.0 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012ZA	1.0 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012ZB	1.0 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012ZC	1.0 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012ZG	1.0 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY012ZH	1.0 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013AA	1.0 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013AB	1.0 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013AC	1.0 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013AG	1.0 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013AH	1.0 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013BA	1.0 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013BB	1.0 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013BC	1.0 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013BG	1.0 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013BH	1.0 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013CA	1.0 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013CB	1.0 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013CC	1.0 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013CG	1.0 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013CH	1.0 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013EA	1.0 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013EB	1.0 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013EC	1.0 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013EG	1.0 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013EH	1.0 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013FA	1.0 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013FB	1.0 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013FC	1.0 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013FG	1.0 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013FH	1.0 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013JA	1.0 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013JB	1.0 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013JC	1.0 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013JG	1.0 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013JH	1.0 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013QA	1.0 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013QB	1.0 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013QC	1.0 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013QG	1.0 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013QH	1.0 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013ZA	1.0 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013ZB	1.0 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013ZC	1.0 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013ZG	1.0 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY013ZH	1.0 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014AA	1.0 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014AB	1.0 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014AC	1.0 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014AG	1.0 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014AH	1.0 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014BA	1.0 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014BB	1.0 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014BC	1.0 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014BG	1.0 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014BH	1.0 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014CA	1.0 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014CB	1.0 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014CC	1.0 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014CG	1.0 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014CH	1.0 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014EA	1.0 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014EB	1.0 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014EC	1.0 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014EG	1.0 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014EH	1.0 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014FA	1.0 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014FB	1.0 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014FC	1.0 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014FG	1.0 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014FH	1.0 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014JA	1.0 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014JB	1.0 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014JC	1.0 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014JG	1.0 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014JH	1.0 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014QA	1.0 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014QB	1.0 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014QC	1.0 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014QG	1.0 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014QH	1.0 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014ZA	1.0 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014ZB	1.0 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014ZC	1.0 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014ZG	1.0 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig
MNY014ZH	1.0 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated	≤ 50 cc/min at 0.34 bar / ≤ 50 cc/min at 5 psig

Request a Quote

Select up to five part numbers in the table above, or tell us what you need and our specialists will help you choose.

This part number is already on the request. Tell us how many you need and our specialists will come back to you.

Filtration & Separation+

Pure Water Solutions+

Water Technologies+

Memtrex™ NY Pleated Filters with Hydrophilic Nylon 66 Membrane

Note

Typical Applications

General Properties

Additional Information

Literature

Specifications

Part Numbers

Request a Quote