MMP923AA-B
Part of Memtrex™ MP-B Pleated Filters with Polyethersulfone Membrane
Memtrex MP-B (MMP-B) filters (Figure 1) offer a PES membrane specifically designed for beverage applications.
Literature
Specifications
- Absolute Micron Rating
- 0.2 µm
- End #1 Adapter
- Open End Gasket
- End #2 Adapter
- Open End Gasket
- Nominal Cartridge Length
- 76 cm / 30 in
Integrity Testing
≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
Note
Trademark of General Electric Company; may be registered in one or more countries.
Typical Applications
Memtrex-MP-B filters are specifically designed for beverage filtration. Typical applications include final filtration of:
- Wine
- Beer
- Fruit Juices
- Bottled Water
General Properties
Memtrex MP-B filters are available the following absolute pore size micron ratings: 0.2, 0.45 and 0.65 µm. Tables 1, 2, 3, 4 and 5 show further details on materials of construction, dimensions, operational limits, integrity testing and flow performance.
Additional Information
- Memtrex MP-B filters may be autoclaved or in situ steam sterilized (up to 257°F [125°C] 30-minute cycles) for a maximum accumulated exposure of 10 hours. Alternatively, the filters may be sanitized with compatible chemical agents.
- GE certifies that the materials contained in its Memtrex MP-B pleated filters meet US FDA requirements for food contact under the applicable regulations in 21 CFR. For further information, contact GE technical services. Memtrex MP-B filters meet the test criteria for USP Class VI-121°C Plastics.
- Aqueous extracts from Memtrex MP-B filters contain less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues. GE Filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
Line Specifications
- Core and Cage
- Polypropylene
- Effective Filtration Area
- 7 ft² / 1 m²
- Elastomer Material
- Buna-N, EPOM, Silicone, Viton
- Endcaps and Adapters
- Polypropylene
- Grade
- Beverage
- Maximum Forward Differential Pressure @ 70°F (21°C)
- 4.1 bar / 60 psi
- Maximum Operating Temperature at 10 psid (0.7 bar) in Water
- 82 °C / 180 °F
- Maximum Reverse Differential Pressure @ 70°F (21°C)
- 2.1 bar / 30 psi
- Media Material
- Hydrophilic Polyethersulfone Membrane
- Nominal Inside Diameter
- 1.25 in / 31 mm
- Nominal Outside Diameter
- 2.75 in / 70 mm
- Prefiltration Media Material
- Polypropylene Microfiber
- Support Layers
- Polypropylene Microfiber
- Type
- MMP
See more parts in Memtrex™ MP-B Pleated Filters with Polyethersulfone Membrane
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.