Memtrex™ MP-B Pleated Filters with Polyethersulfone Membrane

Memtrex MP-B (MMP-B) filters (Figure 1) offer a PES membrane specifically designed for beverage applications.

Product CatalogPleated Filter Cartridges

Memtrex MP-B (MMP-B) filters (Figure 1) offer a PES membrane specifically designed for beverage applications. MMP-B cartridge filters exhibit the low protein-binding, high flow rates and high through-puts that are crucial for today’s demanding beverage process. Every filter is 100% integrity tested. As industry standards rise and new precautions are taken to ensure product purity, you can rely on GE Water & Process Technologies MMP-B filters to provide reliable filtration for all your beverage applications-bottled water, beer, wine, liquor, fruit juices, and fountain drinks.

The MMP-B filter is just one example of our strong commitment to the beverage industry. Our complete portfolio includes filters for every stage of processing, and we offer custom solutions for your unique applications. GE is your complete source for filters, crossflow membranes, housings, and other filtration equipment.

Note

Trademark of General Electric Company; may be registered in one or more countries.

Typical Applications

Memtrex-MP-B filters are specifically designed for beverage filtration. Typical applications include final filtration of:

Wine
Beer
Fruit Juices
Bottled Water

General Properties

Memtrex MP-B filters are available the following absolute pore size micron ratings: 0.2, 0.45 and 0.65 µm. Tables 1, 2, 3, 4 and 5 show further details on materials of construction, dimensions, operational limits, integrity testing and flow performance.

Additional Information

Memtrex MP-B filters may be autoclaved or in situ steam sterilized (up to 257°F [125°C] 30-minute cycles) for a maximum accumulated exposure of 10 hours. Alternatively, the filters may be sanitized with compatible chemical agents.
GE certifies that the materials contained in its Memtrex MP-B pleated filters meet US FDA requirements for food contact under the applicable regulations in 21 CFR. For further information, contact GE technical services. Memtrex MP-B filters meet the test criteria for USP Class VI-121°C Plastics.
Aqueous extracts from Memtrex MP-B filters contain less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues. GE Filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.

Request a Quote

Literature

Specifications

Core and Cage: Polypropylene
Effective Filtration Area: 7 ft² / 1 m²
Elastomer Material: Buna-N, EPOM, Silicone, Viton
Endcaps and Adapters: Polypropylene
Grade: Beverage
Maximum Forward Differential Pressure @ 70°F (21°C): 4.1 bar / 60 psi
Maximum Operating Temperature at 10 psid (0.7 bar) in Water: 82 °C / 180 °F
Maximum Reverse Differential Pressure @ 70°F (21°C): 2.1 bar / 30 psi
Media Material: Hydrophilic Polyethersulfone Membrane
Nominal Inside Diameter: 1.25 in / 31 mm
Nominal Outside Diameter: 2.75 in / 70 mm
Prefiltration Media Material: Polypropylene Microfiber
Support Layers: Polypropylene Microfiber
Type: MMP

Part Numbers

480 parts available

Part Number	Absolute Micron Rating (µm)	Nominal Cartridge Length (cm / in)	End #1 Adapter	End #2 Adapter	Integrity Testing (bar / psi / psig)
MMP921AA-B	0.2 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921AB-B	0.2 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921AC-B	0.2 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921AG-B	0.2 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921AH-B	0.2 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921BA-B	0.2 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921BB-B	0.2 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921BC-B	0.2 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921BG-B	0.2 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921BH-B	0.2 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921CA-B	0.2 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921CB-B	0.2 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921CC-B	0.2 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921CG-B	0.2 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921CH-B	0.2 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921EA-B	0.2 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921EB-B	0.2 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921EC-B	0.2 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921EG-B	0.2 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921EH-B	0.2 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921FA-B	0.2 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921FB-B	0.2 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921FC-B	0.2 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921FG-B	0.2 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921FH-B	0.2 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921JA-B	0.2 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921JB-B	0.2 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921JC-B	0.2 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921JG-B	0.2 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921JH-B	0.2 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921QA-B	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921QB-B	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921QC-B	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921QG-B	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921QH-B	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921ZA-B	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921ZB-B	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921ZC-B	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921ZG-B	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP921ZH-B	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922AA-B	0.2 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922AB-B	0.2 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922AC-B	0.2 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922AG-B	0.2 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922AH-B	0.2 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922BA-B	0.2 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922BB-B	0.2 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922BC-B	0.2 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922BG-B	0.2 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922BH-B	0.2 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922CA-B	0.2 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922CB-B	0.2 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922CC-B	0.2 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922CG-B	0.2 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922CH-B	0.2 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922EA-B	0.2 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922EB-B	0.2 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922EC-B	0.2 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922EG-B	0.2 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922EH-B	0.2 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922FA-B	0.2 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922FB-B	0.2 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922FC-B	0.2 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922FG-B	0.2 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922FH-B	0.2 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922JA-B	0.2 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922JB-B	0.2 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922JC-B	0.2 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922JG-B	0.2 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922JH-B	0.2 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922QA-B	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922QB-B	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922QC-B	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922QG-B	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922QH-B	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922ZA-B	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922ZB-B	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922ZC-B	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922ZG-B	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP922ZH-B	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923AA-B	0.2 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923AB-B	0.2 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923AC-B	0.2 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923AG-B	0.2 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923AH-B	0.2 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923BA-B	0.2 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923BB-B	0.2 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923BC-B	0.2 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923BG-B	0.2 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923BH-B	0.2 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923CA-B	0.2 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923CB-B	0.2 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923CC-B	0.2 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923CG-B	0.2 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923CH-B	0.2 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923EA-B	0.2 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923EB-B	0.2 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923EC-B	0.2 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923EG-B	0.2 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923EH-B	0.2 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923FA-B	0.2 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923FB-B	0.2 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923FC-B	0.2 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923FG-B	0.2 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923FH-B	0.2 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923JA-B	0.2 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923JB-B	0.2 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923JC-B	0.2 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923JG-B	0.2 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923JH-B	0.2 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923QA-B	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923QB-B	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923QC-B	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923QG-B	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923QH-B	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923ZA-B	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923ZB-B	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923ZC-B	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923ZG-B	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP923ZH-B	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924AA-B	0.2 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924AB-B	0.2 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924AC-B	0.2 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924AG-B	0.2 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924AH-B	0.2 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924BA-B	0.2 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924BB-B	0.2 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924BC-B	0.2 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924BG-B	0.2 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924BH-B	0.2 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924CA-B	0.2 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924CB-B	0.2 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924CC-B	0.2 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924CG-B	0.2 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924CH-B	0.2 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924EA-B	0.2 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924EB-B	0.2 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924EC-B	0.2 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924EG-B	0.2 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924EH-B	0.2 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924FA-B	0.2 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924FB-B	0.2 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924FC-B	0.2 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924FG-B	0.2 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924FH-B	0.2 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924JA-B	0.2 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924JB-B	0.2 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924JC-B	0.2 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924JG-B	0.2 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924JH-B	0.2 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924QA-B	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924QB-B	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924QC-B	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924QG-B	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924QH-B	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924ZA-B	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924ZB-B	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924ZC-B	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924ZG-B	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP924ZH-B	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤19 cc/min at 2.07 bar / ≤19 cc/min at 30 psi
MMP941AA-B	0.45 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941AB-B	0.45 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941AC-B	0.45 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941AG-B	0.45 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941AH-B	0.45 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941BA-B	0.45 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941BB-B	0.45 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941BC-B	0.45 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941BG-B	0.45 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941BH-B	0.45 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941CA-B	0.45 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941CB-B	0.45 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941CC-B	0.45 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941CG-B	0.45 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941CH-B	0.45 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941EA-B	0.45 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941EB-B	0.45 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941EC-B	0.45 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941EG-B	0.45 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941EH-B	0.45 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941FA-B	0.45 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941FB-B	0.45 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941FC-B	0.45 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941FG-B	0.45 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941FH-B	0.45 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941JA-B	0.45 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941JB-B	0.45 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941JC-B	0.45 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941JG-B	0.45 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941JH-B	0.45 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941QA-B	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941QB-B	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941QC-B	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941QG-B	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941QH-B	0.45 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941ZA-B	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941ZB-B	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941ZC-B	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941ZG-B	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP941ZH-B	0.45 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942AA-B	0.45 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942AB-B	0.45 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942AC-B	0.45 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942AG-B	0.45 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942AH-B	0.45 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942BA-B	0.45 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942BB-B	0.45 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942BC-B	0.45 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942BG-B	0.45 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942BH-B	0.45 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942CA-B	0.45 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942CB-B	0.45 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942CC-B	0.45 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942CG-B	0.45 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942CH-B	0.45 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942EA-B	0.45 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942EB-B	0.45 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942EC-B	0.45 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942EG-B	0.45 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942EH-B	0.45 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942FA-B	0.45 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942FB-B	0.45 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942FC-B	0.45 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942FG-B	0.45 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942FH-B	0.45 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942JA-B	0.45 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942JB-B	0.45 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942JC-B	0.45 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942JG-B	0.45 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942JH-B	0.45 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942QA-B	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942QB-B	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942QC-B	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942QG-B	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942QH-B	0.45 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942ZA-B	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942ZB-B	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942ZC-B	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942ZG-B	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP942ZH-B	0.45 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943AA-B	0.45 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943AB-B	0.45 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943AC-B	0.45 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943AG-B	0.45 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943AH-B	0.45 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943BA-B	0.45 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943BB-B	0.45 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943BC-B	0.45 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943BG-B	0.45 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943BH-B	0.45 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943CA-B	0.45 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943CB-B	0.45 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943CC-B	0.45 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943CG-B	0.45 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943CH-B	0.45 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943EA-B	0.45 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943EB-B	0.45 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943EC-B	0.45 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943EG-B	0.45 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943EH-B	0.45 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943FA-B	0.45 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943FB-B	0.45 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943FC-B	0.45 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943FG-B	0.45 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943FH-B	0.45 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943JA-B	0.45 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943JB-B	0.45 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943JC-B	0.45 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943JG-B	0.45 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943JH-B	0.45 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943QA-B	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943QB-B	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943QC-B	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943QG-B	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943QH-B	0.45 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943ZA-B	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943ZB-B	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943ZC-B	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943ZG-B	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP943ZH-B	0.45 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944AA-B	0.45 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944AB-B	0.45 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944AC-B	0.45 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944AG-B	0.45 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944AH-B	0.45 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944BA-B	0.45 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944BB-B	0.45 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944BC-B	0.45 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944BG-B	0.45 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944BH-B	0.45 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944CA-B	0.45 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944CB-B	0.45 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944CC-B	0.45 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944CG-B	0.45 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944CH-B	0.45 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944EA-B	0.45 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944EB-B	0.45 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944EC-B	0.45 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944EG-B	0.45 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944EH-B	0.45 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944FA-B	0.45 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944FB-B	0.45 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944FC-B	0.45 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944FG-B	0.45 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944FH-B	0.45 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944JA-B	0.45 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944JB-B	0.45 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944JC-B	0.45 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944JG-B	0.45 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944JH-B	0.45 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944QA-B	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944QB-B	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944QC-B	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944QG-B	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944QH-B	0.45 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944ZA-B	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944ZB-B	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944ZC-B	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944ZG-B	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP944ZH-B	0.45 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤16 cc/min at 1.38 bar / ≤16 cc/min at 20 psi
MMP961AA-B	0.65 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961AB-B	0.65 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961AC-B	0.65 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961AG-B	0.65 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961AH-B	0.65 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961BA-B	0.65 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961BB-B	0.65 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961BC-B	0.65 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961BG-B	0.65 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961BH-B	0.65 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961CA-B	0.65 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961CB-B	0.65 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961CC-B	0.65 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961CG-B	0.65 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961CH-B	0.65 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961EA-B	0.65 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961EB-B	0.65 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961EC-B	0.65 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961EG-B	0.65 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961EH-B	0.65 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961FA-B	0.65 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961FB-B	0.65 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961FC-B	0.65 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961FG-B	0.65 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961FH-B	0.65 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961JA-B	0.65 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961JB-B	0.65 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961JC-B	0.65 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961JG-B	0.65 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961JH-B	0.65 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961QA-B	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961QB-B	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961QC-B	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961QG-B	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961QH-B	0.65 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961ZA-B	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961ZB-B	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961ZC-B	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961ZG-B	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP961ZH-B	0.65 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962AA-B	0.65 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962AB-B	0.65 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962AC-B	0.65 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962AG-B	0.65 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962AH-B	0.65 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962BA-B	0.65 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962BB-B	0.65 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962BC-B	0.65 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962BG-B	0.65 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962BH-B	0.65 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962CA-B	0.65 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962CB-B	0.65 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962CC-B	0.65 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962CG-B	0.65 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962CH-B	0.65 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962EA-B	0.65 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962EB-B	0.65 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962EC-B	0.65 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962EG-B	0.65 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962EH-B	0.65 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962FA-B	0.65 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962FB-B	0.65 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962FC-B	0.65 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962FG-B	0.65 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962FH-B	0.65 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962JA-B	0.65 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962JB-B	0.65 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962JC-B	0.65 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962JG-B	0.65 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962JH-B	0.65 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962QA-B	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962QB-B	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962QC-B	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962QG-B	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962QH-B	0.65 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962ZA-B	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962ZB-B	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962ZC-B	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962ZG-B	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP962ZH-B	0.65 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963AA-B	0.65 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963AB-B	0.65 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963AC-B	0.65 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963AG-B	0.65 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963AH-B	0.65 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963BA-B	0.65 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963BB-B	0.65 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963BC-B	0.65 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963BG-B	0.65 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963BH-B	0.65 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963CA-B	0.65 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963CB-B	0.65 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963CC-B	0.65 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963CG-B	0.65 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963CH-B	0.65 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963EA-B	0.65 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963EB-B	0.65 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963EC-B	0.65 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963EG-B	0.65 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963EH-B	0.65 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963FA-B	0.65 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963FB-B	0.65 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963FC-B	0.65 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963FG-B	0.65 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963FH-B	0.65 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963JA-B	0.65 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963JB-B	0.65 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963JC-B	0.65 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963JG-B	0.65 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963JH-B	0.65 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963QA-B	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963QB-B	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963QC-B	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963QG-B	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963QH-B	0.65 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963ZA-B	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963ZB-B	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963ZC-B	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963ZG-B	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP963ZH-B	0.65 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964AA-B	0.65 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964AB-B	0.65 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964AC-B	0.65 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964AG-B	0.65 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964AH-B	0.65 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964BA-B	0.65 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964BB-B	0.65 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964BC-B	0.65 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964BG-B	0.65 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964BH-B	0.65 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964CA-B	0.65 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964CB-B	0.65 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964CC-B	0.65 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964CG-B	0.65 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964CH-B	0.65 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964EA-B	0.65 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964EB-B	0.65 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964EC-B	0.65 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964EG-B	0.65 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964EH-B	0.65 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964FA-B	0.65 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964FB-B	0.65 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964FC-B	0.65 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964FG-B	0.65 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964FH-B	0.65 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964JA-B	0.65 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964JB-B	0.65 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964JC-B	0.65 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964JG-B	0.65 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964JH-B	0.65 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964QA-B	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964QB-B	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964QC-B	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964QG-B	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964QH-B	0.65 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964ZA-B	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964ZB-B	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964ZC-B	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964ZG-B	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi
MMP964ZH-B	0.65 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	≤12 cc/min at 0.90 bar / ≤12 cc/min at 13 psi

Request a Quote

Select up to five part numbers in the table above, or tell us what you need and our specialists will help you choose.

This part number is already on the request. Tell us how many you need and our specialists will come back to you.

Filtration & Separation+

Pure Water Solutions+

Water Technologies+

Memtrex™ MP-B Pleated Filters with Polyethersulfone Membrane

Note

Typical Applications

General Properties

Additional Information

Literature

Specifications

Part Numbers

Request a Quote