25-60205
Part of Clariflow®-E Cartridges
Hydrophilic PES membrane cartridges for aqueous applications
Literature
Specifications
- End Fittings
- 226/Flat
- Filter Rating
- 0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm
- Insert Style
- Encapsulated Polysulfone
- Nominal Length
- 5 in / 130 mm
Benefits
- High-retention hydrophilic membrane
- High flow rate
- Broad chemical compatibility for multiple applications
- Long on-stream life
- 100% integrity tested
Applications
- BOE
- Dilute HF
- POU DI rinse
- Bulk DI water systems
- Copper plating
- Ni plating
- Hard disk wash processes
- Other dilute acids and bases
Technical Support and Product Information
Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office.
Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.
Note
Specifications are subject to change without notification.
Clariflow is a registered trademark of Parker Hannifin Corporation.
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
Cuno is a registered trademark of Cuno Inc.
Line Specifications
- Cleanliness (Particle Shedding)
- Dry-packed: 0.2µm after 6gal at 1gpm
Data as from open bag and installed, no additional installation flushing. - Effective Filtration Area per 10 inch (250 mm) Cartridge
- 6.8 ft² / 0.63 m²
- Gasket/O-Ring Material
- Buna N, EPDM, FEP Encapsulated Silicone (O-Rings only), FEP Encapsulated Viton (O-Rings only), None, Silicone, Viton®
- Maximum Forward Differential Pressure/Temperature @ 180°F (82°C)
- 2.8 bar / 40 psid
- Maximum Forward Differential Pressure/Temperature @ 75°F (24°C)
- 5.5 bar / 80 psid
- Maximum Reverse Differential Pressure/Temperature @ 75°F (24°C)
- 3.4 bar / 50 psid
- Membrane
- Polyethersulfone
- Resistivity Rinse-Up
- Resistivity rinse-up to background minus 0.2megohm-cm of feed after 20gal @ 1gpm.
- Structure
- Polypropylene
- Support Layers
- Polypropylene
- Thickness (Gaskets only)
- 0.125″ (3 mm), 0.200″ (5 mm), (1) 0.200″ (5 mm) & (1) 0.125″ (3 mm), No Gasket
- Typical Water Flow Rates
- 0.02 µm – 0.5 gpm/psid (2.75 lpm/100mbar), 0.04 µm – 1.0 gpm/psid (5.49 lpm/100mbar), 0.10 µm – 1.8 gpm/psid (9.88 lpm/100mbar), 0.20 µm – 3.7 gpm/psid (20.31 lpm/100mbar), 0.45 µm – 4.8 gpm/psid (26.35 lpm/100mbar), 0.65 µm – 8.9 gpm/psid (48.86 lpm/100mbar), 0.80 µm – 9.5 gpm/psid (52.16 lpm/100mbar)
See more parts in Clariflow®-E Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.