Search Catalog

1206 Capitol Drive · Addison, IL 60101 USA

Water Technologies

Process Technologies

Coarse Straining

Upstream protection and bulk separation

Cartridge Filtration

Precision fine and depth filtration

Membrane Technologies

Micro, ultra, nano and reverse osmosis

RO-NF-UF Membranes

Start Here

Process Filtration and Separation Technologies

From reverse osmosis to coarse straining, custom-designed solutions for Midwest industrial processes. In-plant surveys, application testing and complete process optimization.

Explore Solutions

Request a Quote

Authorized distributor for GE/Osmonics, Purolator, Parker, Eaton, Critical Process Filtration, Filter Technologies

Pre-Treatment

Conditioning ahead of the process

Purification

Reverse osmosis and demineralization

Polishing and Service

High purity finishing and on-site support

Electro-Deionization (EDI)

Start Here

Pure Water Solutions

Complete industrial water treatment, from softening and media filtration through reverse osmosis, deionization and EDI polishing. Installation, maintenance and training for the life of the system.

Explore Solutions

Request a Quote

Water treatment for homes and businesses from Pargreen Water Technologies: Residential, Commercial, Industrial

Clariflow®-E Cartridges

Hydrophilic PES membrane cartridges for aqueous applications

Product CatalogPleated Filter Cartridges

Clariflow®-E cartridges are optimized for use in microelectronics applications such as DI water and aqueous-based chemicals. The unique mirrored anisotropic PES (Polyethersulfone) membrane has exceptionally high flow rates and on-stream lifetime while providing consistent removal of both organic and inorganic particulates.

The combination of hydrophilic PES membrane and a high-purity, all-polypropylene support structure results in a very low level of ionic and organic extractables, broad chemical compatibility, and resistance to particle shedding.

Every cartridge is fabricated in a clean room environment, pre-flushed with 18 megohm-cm ultrapure DI water, and 100% integrity tested in an ISO-certified facility.

Benefits

High-retention hydrophilic membrane
High flow rate
Broad chemical compatibility for multiple applications
Long on-stream life
100% integrity tested

Applications

BOE
Dilute HF
POU DI rinse
Bulk DI water systems
Copper plating
Ni plating
Hard disk wash processes
Other dilute acids and bases

Technical Support and Product Information

Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office.

Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.

Note

Specifications are subject to change without notification.
Clariflow is a registered trademark of Parker Hannifin Corporation.
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
Cuno is a registered trademark of Cuno Inc.

Request a Quote

Literature

Brochure (PDF, 203 KB)

Specifications

Cleanliness (Particle Shedding): Dry-packed: 0.2µm after 6gal at 1gpm
Data as from open bag and installed, no additional installation flushing.
Effective Filtration Area per 10 inch (250 mm) Cartridge: 6.8 ft² / 0.63 m²
Gasket/O-Ring Material: Buna N, EPDM, FEP Encapsulated Silicone (O-Rings only), FEP Encapsulated Viton (O-Rings only), None, Silicone, Viton®
Maximum Forward Differential Pressure/Temperature @ 180°F (82°C): 2.8 bar / 40 psid
Maximum Forward Differential Pressure/Temperature @ 75°F (24°C): 5.5 bar / 80 psid
Maximum Reverse Differential Pressure/Temperature @ 75°F (24°C): 3.4 bar / 50 psid
Membrane: Polyethersulfone
Resistivity Rinse-Up: Resistivity rinse-up to background minus 0.2megohm-cm of feed after 20gal @ 1gpm.
Structure: Polypropylene
Support Layers: Polypropylene
Thickness (Gaskets only): 0.125″ (3 mm), 0.200″ (5 mm), (1) 0.200″ (5 mm) & (1) 0.125″ (3 mm), No Gasket
Typical Water Flow Rates: 0.02 µm – 0.5 gpm/psid (2.75 lpm/100mbar), 0.04 µm – 1.0 gpm/psid (5.49 lpm/100mbar), 0.10 µm – 1.8 gpm/psid (9.88 lpm/100mbar), 0.20 µm – 3.7 gpm/psid (20.31 lpm/100mbar), 0.45 µm – 4.8 gpm/psid (26.35 lpm/100mbar), 0.65 µm – 8.9 gpm/psid (48.86 lpm/100mbar), 0.80 µm – 9.5 gpm/psid (52.16 lpm/100mbar)

Part Numbers

112 parts available

Part Number	Filter Rating (µm)	Insert Style	End Fittings	Nominal Length (cm / in / mm)
25-10205	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	None (STD)	226/Flat	5 in / 130 mm
25-10305	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	None (STD)	222/Flat	5 in / 130 mm
25-10705	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	None (STD)	226/Fin	5 in / 130 mm
25-10805	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	None (STD)	222/Fin	5 in / 130 mm
25-50205	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	Encapsulated 316L Stainless Steel	226/Flat	5 in / 130 mm
25-50305	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	Encapsulated 316L Stainless Steel	222/Flat	5 in / 130 mm
25-50705	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	Encapsulated 316L Stainless Steel	226/Fin	5 in / 130 mm
25-50805	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	Encapsulated 316L Stainless Steel	222/Fin	5 in / 130 mm
25-60205	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	Encapsulated Polysulfone	226/Flat	5 in / 130 mm
25-60305	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	Encapsulated Polysulfone	222/Flat	5 in / 130 mm
25-60705	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	Encapsulated Polysulfone	226/Fin	5 in / 130 mm
25-60805	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	Encapsulated Polysulfone	222/Fin	5 in / 130 mm
25-A0205	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	1/2″ Shortened on 222 Fitting	226/Flat	5 in / 130 mm
25-A0305	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	1/2″ Shortened on 222 Fitting	222/Flat	5 in / 130 mm
25-A0705	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	1/2″ Shortened on 222 Fitting	226/Fin	5 in / 130 mm
25-A0805	0.2, 0.8, 0.04, 0.10, 0.45, 0.65 µm	1/2″ Shortened on 222 Fitting	222/Fin	5 in / 130 mm
25-10010	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	DOE (CUNO®)	10 in / 250 mm
25-10020	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	DOE (CUNO®)	20 in / 500 mm
25-10030	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	DOE (CUNO®)	30 in / 750 mm
25-10040	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	DOE (CUNO®)	40 in / 1000 mm
25-10110	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	DOE	10 in / 250 mm
25-10120	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	DOE	20 in / 500 mm
25-10130	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	DOE	30 in / 750 mm
25-10140	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	DOE	40 in / 1000 mm
25-10610	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	020/Internal/Flat	10 in / 250 mm
25-10620	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	020/Internal/Flat	20 in / 500 mm
25-10630	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	020/Internal/Flat	30 in / 750 mm
25-10640	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	020/Internal/Flat	40 in / 1000 mm
25-10G10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	120/Internal/Recessed Endcap	10 in / 250 mm
25-10G20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	120/Internal/Recessed Endcap	20 in / 500 mm
25-10G30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	120/Internal/Recessed Endcap	30 in / 750 mm
25-10G40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	120/Internal/Recessed Endcap	40 in / 1000 mm
25-10H10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	213/Recessed Endcap (Ametek)	10 in / 250 mm
25-10H20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	213/Recessed Endcap (Ametek)	20 in / 500 mm
25-10H30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	213/Recessed Endcap (Ametek)	30 in / 750 mm
25-10H40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	213/Recessed Endcap (Ametek)	40 in / 1000 mm
25-10R10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	222/Recessed Endcap	10 in / 250 mm
25-10R20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	222/Recessed Endcap	20 in / 500 mm
25-10R30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	222/Recessed Endcap	30 in / 750 mm
25-10R40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	None (STD)	222/Recessed Endcap	40 in / 1000 mm
25-50010	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	DOE (CUNO®)	10 in / 250 mm
25-50020	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	DOE (CUNO®)	20 in / 500 mm
25-50030	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	DOE (CUNO®)	30 in / 750 mm
25-50040	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	DOE (CUNO®)	40 in / 1000 mm
25-50110	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	DOE	10 in / 250 mm
25-50120	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	DOE	20 in / 500 mm
25-50130	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	DOE	30 in / 750 mm
25-50140	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	DOE	40 in / 1000 mm
25-50610	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	020/Internal/Flat	10 in / 250 mm
25-50620	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	020/Internal/Flat	20 in / 500 mm
25-50630	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	020/Internal/Flat	30 in / 750 mm
25-50640	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	020/Internal/Flat	40 in / 1000 mm
25-50G10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	120/Internal/Recessed Endcap	10 in / 250 mm
25-50G20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	120/Internal/Recessed Endcap	20 in / 500 mm
25-50G30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	120/Internal/Recessed Endcap	30 in / 750 mm
25-50G40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	120/Internal/Recessed Endcap	40 in / 1000 mm
25-50H10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	213/Recessed Endcap (Ametek)	10 in / 250 mm
25-50H20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	213/Recessed Endcap (Ametek)	20 in / 500 mm
25-50H30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	213/Recessed Endcap (Ametek)	30 in / 750 mm
25-50H40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	213/Recessed Endcap (Ametek)	40 in / 1000 mm
25-50R10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	222/Recessed Endcap	10 in / 250 mm
25-50R20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	222/Recessed Endcap	20 in / 500 mm
25-50R30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	222/Recessed Endcap	30 in / 750 mm
25-50R40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated 316L Stainless Steel	222/Recessed Endcap	40 in / 1000 mm
25-60010	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	DOE (CUNO®)	10 in / 250 mm
25-60020	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	DOE (CUNO®)	20 in / 500 mm
25-60030	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	DOE (CUNO®)	30 in / 750 mm
25-60040	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	DOE (CUNO®)	40 in / 1000 mm
25-60110	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	DOE	10 in / 250 mm
25-60120	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	DOE	20 in / 500 mm
25-60130	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	DOE	30 in / 750 mm
25-60140	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	DOE	40 in / 1000 mm
25-60610	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	020/Internal/Flat	10 in / 250 mm
25-60620	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	020/Internal/Flat	20 in / 500 mm
25-60630	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	020/Internal/Flat	30 in / 750 mm
25-60640	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	020/Internal/Flat	40 in / 1000 mm
25-60G10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	120/Internal/Recessed Endcap	10 in / 250 mm
25-60G20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	120/Internal/Recessed Endcap	20 in / 500 mm
25-60G30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	120/Internal/Recessed Endcap	30 in / 750 mm
25-60G40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	120/Internal/Recessed Endcap	40 in / 1000 mm
25-60H10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	213/Recessed Endcap (Ametek)	10 in / 250 mm
25-60H20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	213/Recessed Endcap (Ametek)	20 in / 500 mm
25-60H30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	213/Recessed Endcap (Ametek)	30 in / 750 mm
25-60H40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	213/Recessed Endcap (Ametek)	40 in / 1000 mm
25-60R10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	222/Recessed Endcap	10 in / 250 mm
25-60R20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	222/Recessed Endcap	20 in / 500 mm
25-60R30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	222/Recessed Endcap	30 in / 750 mm
25-60R40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	Encapsulated Polysulfone	222/Recessed Endcap	40 in / 1000 mm
25-A0010	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	DOE (CUNO®)	10 in / 250 mm
25-A0020	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	DOE (CUNO®)	20 in / 500 mm
25-A0030	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	DOE (CUNO®)	30 in / 750 mm
25-A0040	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	DOE (CUNO®)	40 in / 1000 mm
25-A0110	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	DOE	10 in / 250 mm
25-A0120	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	DOE	20 in / 500 mm
25-A0130	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	DOE	30 in / 750 mm
25-A0140	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	DOE	40 in / 1000 mm
25-A0610	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	020/Internal/Flat	10 in / 250 mm
25-A0620	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	020/Internal/Flat	20 in / 500 mm
25-A0630	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	020/Internal/Flat	30 in / 750 mm
25-A0640	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	020/Internal/Flat	40 in / 1000 mm
25-A0G10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	120/Internal/Recessed Endcap	10 in / 250 mm
25-A0G20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	120/Internal/Recessed Endcap	20 in / 500 mm
25-A0G30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	120/Internal/Recessed Endcap	30 in / 750 mm
25-A0G40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	120/Internal/Recessed Endcap	40 in / 1000 mm
25-A0H10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	213/Recessed Endcap (Ametek)	10 in / 250 mm
25-A0H20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	213/Recessed Endcap (Ametek)	20 in / 500 mm
25-A0H30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	213/Recessed Endcap (Ametek)	30 in / 750 mm
25-A0H40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	213/Recessed Endcap (Ametek)	40 in / 1000 mm
25-A0R10	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	222/Recessed Endcap	10 in / 250 mm
25-A0R20	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	222/Recessed Endcap	20 in / 500 mm
25-A0R30	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	222/Recessed Endcap	30 in / 750 mm
25-A0R40	0.2, 0.8, 0.04, 0.10, 0.45, 0.65, 0.02 µm	1/2″ Shortened on 222 Fitting	222/Recessed Endcap	40 in / 1000 mm

Request a Quote

Select up to five part numbers in the table above, or tell us what you need and our specialists will help you choose.

This part number is already on the request. Tell us how many you need and our specialists will come back to you.

Filtration & Separation+

Pure Water Solutions+

Water Technologies+

Clariflow®-E Cartridges

Benefits

Applications

Technical Support and Product Information

Note

Literature

Specifications

Part Numbers

Request a Quote