AG8040F 400 2PASS
Part of AG 2PASS Series Standard Brackish Water Elements for 2 Pass RO Systems
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry.
Literature
Specifications
- Active Area
- 400 ft² / 37.2 m²
- Boxed Weight
- 14.5 kg / 32 lb
- Dimension B
- 2.86 cm / 1.125 in
- Dimension C (Outside Diameter)
- 20.1 cm / 7.9 in
- Flow Average
- 39.8 m³/day / 10500 gpd
- Part Number
- 1264191
Note
Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%.
Testing conditions: 2,000 ppm NaCl solution at 225 psig (1,551 kPa) operating pressure, 77 °F, pH 7.5 and 15% recovery.
Note
These elements are shipped dry.
Trademark of General Electric Company; may be registered in one or more countries.
Line Specifications
- Chlorine Tolerance
- 1,000+ ppm-hours, Dechlorination Recommended
- Cleaning Range Recommended pH
- 2.0 – 11.5
- Dimension A (Length)
- 101.6 cm / 40.0 in
- Feedwater
- NTU < 1, SDI < 5
- Maximum Cleaning Temperature
- 50 °C / 122 °F
- Maximum Operating Temperature
- 50 °C / 122 °F
- Maximum Pressure
- 4137 kPa / 600 psig
- Membrane
- A-Series, Thin-Film Membrane (TFM™)
- Operating Range Recommended pH
- 4.0 – 11
- Optimum Rejection Recommended pH
- 7.0 – 7.5
- Outer Wrap
- Fiberglass
- Recommended Pressure Drop Over an Element
- 83 kPa / 12 psig
- Recommended Pressure Drop Per Housing
- 345 kPa / 50 psig
- Salt Rejection Average (NaCl)
- 99.5 %
- Salt Rejection Minimum (NaCl)
- 99.0 %
- Typical Operating Flux
- 10 – 20 GFD / 15 – 35 LMH
- Typical Operating Pressure
- 1379 kPa / 200 psig
See more parts in AG 2PASS Series Standard Brackish Water Elements for 2 Pass RO Systems
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.