800.323.2810

sales@pargreen.com

Search Catalog

Search catalog

1206 Capitol Drive · Addison, IL 60101 USA

Water Technologies
Process Technologies

Coarse Straining

Upstream protection and bulk separation

Cartridge Filtration

Precision fine and depth filtration

Membrane Technologies

Micro, ultra, nano and reverse osmosis

Start Here

Process Filtration and Separation Technologies

From reverse osmosis to coarse straining, custom-designed solutions for Midwest industrial processes. In-plant surveys, application testing and complete process optimization.

Explore Solutions
Request a Quote

Authorized distributor for GE/Osmonics, Purolator, Parker, Eaton, Critical Process Filtration, Filter Technologies

Full Catalog Index

Pre-Treatment

Conditioning ahead of the process

Purification

Reverse osmosis and demineralization

Polishing and Service

High purity finishing and on-site support

Start Here

Pure Water Solutions

Complete industrial water treatment, from softening and media filtration through reverse osmosis, deionization and EDI polishing. Installation, maintenance and training for the life of the system.

Explore Solutions
Request a Quote

Water treatment for homes and businesses from Pargreen Water Technologies: Residential, Commercial, Industrial

Explore Water Technologies

AG 2PASS Series Standard Brackish Water Elements for 2 Pass RO Systems

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry.

Product CatalogRO-NF-UF Membranes

The AG 2PASS Series has been specifically designed for 2-pass systems. These elements are made of pre-rinsed components avoiding any scaling potential on the second pass at start-up thus avoiding any loss of production.

Note

Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%.
Testing conditions: 2,000 ppm NaCl solution at 225 psig (1,551 kPa) operating pressure, 77 °F, pH 7.5 and 15% recovery.

Note

These elements are shipped dry.
Trademark of General Electric Company; may be registered in one or more countries.

Request a Quote

Literature

Specifications

Chlorine Tolerance
1,000+ ppm-hours, Dechlorination Recommended
Cleaning Range Recommended pH
2.0 – 11.5
Dimension A (Length)
101.6 cm / 40.0 in
Feedwater
NTU < 1, SDI < 5
Maximum Cleaning Temperature
50 °C / 122 °F
Maximum Operating Temperature
50 °C / 122 °F
Maximum Pressure
4137 kPa / 600 psig
Membrane
A-Series, Thin-Film Membrane (TFM™)
Operating Range Recommended pH
4.0 – 11
Optimum Rejection Recommended pH
7.0 – 7.5
Outer Wrap
Fiberglass
Recommended Pressure Drop Over an Element
83 kPa / 12 psig
Recommended Pressure Drop Per Housing
345 kPa / 50 psig
Salt Rejection Average (NaCl)
99.5 %
Salt Rejection Minimum (NaCl)
99.0 %
Typical Operating Flux
10 – 20 GFD / 15 – 35 LMH
Typical Operating Pressure
1379 kPa / 200 psig

Part Numbers

3 parts available

Part NumberFlow Average (m³/day / gpd)Active Area (ft² / m²)Part NumberDimension B (cm / in / mm)Dimension C (Outside Diameter) (cm / in)Boxed Weight (kg / lb)
AG4040FM 2PASS85 m³/day / 2200 gpd85 ft² / 7.9 m²1264262OD: 1.90 cm / 0.75 in9.9 cm / 3.9 in3.5 kg / 8 lb
AG8040F 2PASS34.8 m³/day / 9200 gpd350 ft² / 32.5 m²12641902.86 cm / 1.125 in20.1 cm / 7.9 in14.5 kg / 32 lb
AG8040F 400 2PASS39.8 m³/day / 10500 gpd400 ft² / 37.2 m²12641912.86 cm / 1.125 in20.1 cm / 7.9 in14.5 kg / 32 lb

Request a Quote

Select up to five part numbers in the table above, or tell us what you need and our specialists will help you choose.

This part number is already on the request. Tell us how many you need and our specialists will come back to you.

Phone Number
Filled in from the part you choose. Change it if your request is about a different part.
Quantities, timelines, or anything else that would help us quote accurately.