SXG-03 9 7/8
Part of Selex Depth Cartridge Filters
The Selex (SX) cartridge filter (Figure 1) is a high precision graded density cartridge constructed of 100% pure polypropylene.
Specifications
- Absolute Micron Rating
- 3.0 µm
- Nominal Cartridge Length
- 25.1 cm / 9 7/8 in
- Removal Rating (µm) at Various Efficiencies (90%)
- 1.1
- Removal Rating (µm) at Various Efficiencies (95%)
- 1.5
- Removal Rating (µm) at Various Efficiencies (98%)
- 1.8
- Removal Rating (µm) at Various Efficiencies (99%)
- 2.0
- Removal Rating (µm) at Various Efficiencies (99.50%)
- 2.4
- Removal Rating (µm) Where β = 5000
- 3.0
- Selex Grade
- G
- Type
- SXG
Note
Removal efficiencies are reported for a given particle size, i.e. an efficiency of 99% at 3 microns means that the filter removes 99% of the particles that are 3 microns in size.
The Beta Ratio (β) is calculated as a measure of efficiency for all particles equal to or larger than the given micron size. A Beta Ratio (β) of 5000 represents the removal of 99.98% of all particles equal to or larger than the given micron size.
Trademark of General Electric Company; may be registered in one or more countries.
Typical Applications
- Magnetic Media (CMP) – solvents, slurry/dispersion, Pre-Filter and Final Filter at Coater
- Photographic – Incoming Water, Liquid Chemicals, Developer, Fixer, Stopper Solutions
- Petrochemicals – Waterflood, Completion, Enhanced Oil Recovery, Amines
- Chemical Process Industry – Reagent Grade Chemicals, Process Water
- Pure Water – Pre-RO, Post- DI Resin Trap
- Food and Beverage – Clarification, Process Water, Polishing Filter
- Metal Finishing – Electrodeposition Paint, Precision Electroplating
- Potable Water- Polishing Filter, Giardia Removal
- Pharmaceuticals – Clarify Production Broths, Prefiltration
- Oil and gas – well protection
General Properties
Selex filters are available the following absolute pore size micron ratings: 1, 3, 5, 10, 20 and 30 microns. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, flow performance and performance specifications.
Additional Information
Selex depth cartridge filters are made from thermally- bonded fibers of polypropylene. GE Water & Process Technologies certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21CFR regulations.
When required, specify only FDA compliant sealing materials and end adapters.
GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
Line Specifications
- End #1 Adapter
- 1 inch (25.4 cm) Open End Gasket, 222 O-Ring, 226 O-Ring, Extended Care, Standard Plain End
- End #2 Adapter
- 1 inch (25.4 cm) Open End Gasket, Fin, Self Seal Spring, Solid End
- Endcaps and Adapters
- Polypropylene
- Filtration Media
- Polypropylene
- Gasket Material
- Santoprene
- Maximum Operating Temperature
- 60 °C / 140 °F
- Nominal Inside Diameter
- 1 in / 2.5 mm
- Nominal Outside Diameter
- 6.4 cm / 2.50 in
- O-Rings Material
- Buna, EPDM, Silicone, Viton
See more parts in Selex Depth Cartridge Filters
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.