PX75-40 X
Part of Purtrex Depth Cartridge Filters





The Purtrex depth filter (Figure 1), is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE Water & Process Technologies’ patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity.
Specifications
- Cartridge Length
- 102 cm / 40 in
- End #1 Adapter
- Standard Plain End
- Nominal Micron Rating
- 75 µm
Note
Trademark of General Electric Company; may be registered in one or more countries.
Typical Applications
- Potable water filtration
- Chemical filtration – wide chemical compatibility
- Plating baths
- Amine Filtration
- Meets FDA compliance for food and beverage contact
General Properties
Purtrex filters are available the following pore size nominal micron ratings: 1, 3, 5, 10, 20, 30, 50 and 75 microns. Tables 1, 2 and 3 further details on materials of construction, dimensions and flow performance.
Additional Information
Purtrex Depth cartridge filters are made from thermally-bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations. When required, specify only FDA compliant sealing materials and end adapters.
GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
Line Specifications
- End #2 Adapter
- 1 inch (25.4 cm) Open End Gasket, Fin Adapter, Self Seal Spring, Solid End
- Endcaps and Adapters
- Polypropylene
- Filtration Media
- Polypropylene
- Gasket Material
- Santoprene (Gasket Only)
- Nominal Inside Diameter
- 1 in / 2.5 mm
- Nominal Outside Diameter
- 6.4 cm / 2.50 in
- O-Rings Material
- EPDM, Silicone
- Type
- PX
See more parts in Purtrex Depth Cartridge Filters
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.