34-50R10
Part of Proflow™ II-G Cartridges
Hydrophobic PTFE membrane for general purpose gas and solvent purification
Literature
Specifications
- End Fittings
- 222/Recessed Endcap
- Insert Style
- (Standard) Encapsulated
- Nominal Length
- 10 in / 250 mm
- Treatment Application
- Standard
TOC/Resistivity Rinse-Up (Wet-Packed)
TOC rinse-up to background plus 5ppb of feed after 70gal @ 1gpm. Resistivity rinse-up to background minus 0.2megohm-cm of feed after 30gal @ 1gpm.
Benefits
- Reliable air and liquid flow rates for effective performance
- Broad chemical compatibility enables use in many applications
- Broad range of micron ratings for user convenience
- Superior hydrophobicity for long life in vent/air applications
- Integrity tested to ensure quality
Applications
- Photoresists
- Compressed gas
- Non-sterile venting
- Electronic grade solvents
- Hot deionized water (less than 80°C)
Technical Support and Product Information
Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office.
Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.
Note
Specifications are subject to change without notification.
Polyflow is a registered trademark of Parker Hannifin Corporation.
Viton is a registered trademarks of E.I. DuPont de Nemours & Co., Inc.
Cuno is a registered trademarks of Cuno, Inc.
Line Specifications
- Cleanliness (Particle Shedding)
- Wet-packed: 0.2µm after 6gal at 1gpm
Data as from open bag and installed, no additional installation flushing. - Effective Filtration Area per 10 inch (250 mm) Cartridge
- 5.6 ft² / 0.52 m²
- Filter Rating
- 0.05, 0.10, 0.2, 0.45, 1 µm
- Gasket/O-Ring Material
- Buna N, EPDM, FEP-Encapsulated Silicone (O-Rings only), FEP-Encapsulated Viton (O-Rings only), None, Silicone, Viton®
- Maximum Forward Differential Pressure/Temperature @ 180°F (82°C)
- 2.8 bar / 40 psid
- Maximum Forward Differential Pressure/Temperature @ 75°F (24°C)
- 5.5 bar / 80 psid
- Maximum Reverse Differential Pressure/Temperature @ 75°F (24°C)
- 3.4 bar / 50 psid
- Membrane
- PTFE
- Structure
- Polypropylene
- Support Layers
- Polypropylene
- Thickness (Gaskets only)
- 0.125″ (3 mm), 0.200″ (5 mm), (1) 0.200″ (5 mm) & (1) 0.125″ (3 mm), No Gasket
- Typical Water Flow Rates
- 0.05 µm – 0.6 gpm/psid (3.29 lpm/100 mbar), 0.10 µm – 1.2 gpm/psid (6.59 lpm/100 mbar), 0.20 µm – 2.5 gpm/psid (13.73 lpm/100 mbar), 0.45 µm – 5.1 gpm/psid (28.00 lpm/100 mbar), 1.00 µm – 6.2 gpm/psid (34.04 lpm/100 mbar)
See more parts in Proflow™ II-G Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.