24-60740-101
Part of Polyflow® Membrane Cartridges
Polypropylene membrane cartridges for microelectronics
Literature
Specifications
- Effective Filtration Area per 10 inch (250 mm) Cartridge
- 6.6 ft² / 0.61 m²
- End Fittings
- 226/Fin
- Filter Rating
- 0.07 µm
- Insert Style
- Encapsulated Polysulfone
- Maximum Reverse Differential Pressure/Temperature @ 75°F (24°C)
- 2.8 bar / 40 psid
- Nominal Length
- 40 in / 1000 mm
- Typical Water Flow Rates
- 0.35 gpm/psid / 1.9 lpm/100 mbar
TOC/Resistivity Rinse-Up (Wet-Packed)
TOC rinse-up to background plus 5ppb of feed after 40gal @ 1gpm.
Resistivity rinse-up to background minus 0.2megohm-cm of feed after 40gal @1gpm.
Benefits
- High-retention membrane
- Wide range of configurations and ratings
- 100% integrity tested
Applications
- Bulk photoresist
- Bulk electronics grade chemicals
Technical Support and Product Information
Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office.
Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.
Note
Specifications are subject to change without notification.
Polyflow is a registered trademark of Parker Hannifin Corporation.
Viton is a registered trademarks of E.I. DuPont de Nemours & Co., Inc.
Cuno is a registered trademarks of Cuno, Inc.
Line Specifications
- Cleanliness (Particle Shedding)
- Wet-packed 0.2µm after 10gal at 1gpm
Data as from open bag and installed, no additional installation flushing. - Gasket/O-Ring Material
- Buna N, EPDM, FEP-Encapsulated Viton (O-Rings only), None, Silicone, Viton®
- Maximum Forward Differential Pressure/Temperature @ 180°F (82°C)
- 2.8 bar / 40 psid
- Maximum Forward Differential Pressure/Temperature @ 75°F (24°C)
- 5.5 bar / 80 psid
- Membrane
- Polypropylene
- Metals Extractables
- < 50ppb (total)
- Structure
- Polypropylene
- Support Layers
- Polypropylene
- Thickness (Gaskets only)
- 0.125″ (3 mm), 0.200″ (5 mm), (1) 0.200″ (5 mm) & (1) 0.125″ (3 mm), None
- Treatment Options
- Standard, Wet Packed
See more parts in Polyflow® Membrane Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.