PG-10240-030
All-polypropylene nominally rated depth cartridges for economical prefiltration
Literature
Specifications
- Bulk Packaging per Carton
- 9
- End Fittings
- 226/Flat
- Nominal Filter Rating
- 3.0 µm
- Nominal Length
- 40 in / 1000 mm
- Typical Water Flow Rates
- 70.0 gpm/psid / 384.2 lpm/100 mbar
Note
All components are thermally bonded to ensure integrity and reduce extractables
Benefits
- High flow rate and long service life reduce processing time
- Broad chemical compatibility allows use in most applications
- Thermally bonded construction minimizes extractables for cleaner filtrates
Applications
- Liquid clarification
- General water filtration
- Beverage/wine clarification
- RO/DI prefiltration
Technical Support and Product Information
Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.
Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Coatings and Inks, Process and Chemical industries.
Note
Specifications are subject to change without notification
Polyflow® is a registered trademark of Parker Hannifin Corporation.
Viton® is registered trademark of E.I. DuPont de Nemours & Co., Inc.
Cuno® is a registered trademark of Cuno Inc.
Line Specifications
- Biological Safety
- All components meet USP specifications for Class VI-121°C Plastics criteria.
- Cartridge Extractables
- NVR < 35 mg per 10 inch (250 mm) cartridge
- Depth Media Material
- Polypropylene
- Effective Filtration Area per 10 inch (250 mm) Cartridge
- 3.6 ft² / 0.33 m²
- Gasket/O-Ring Material
- Buna N (Standard), EPDM, FEP Encapsulated Silicone (O-Rings only), FEP Encapsulated Viton® (O-Rings only), None, Silicone, Viton®
- Maximum Forward Differential Pressure/Temperature @ 75°F (24°C)
- 5.5 bar / 80 psid
- Maximum Operating Temperature
- 71 °C / 160 °F
- Maximum Reverse Differential Pressure/Temperature @ 140°F (60°C)
- 1.0 bar / 15 psid
- Maximum Reverse Differential Pressure/Temperature @ 75°F (24°C)
- 2.8 bar / 40 psid
- Structure
- Polypropylene
- Support Layers
- Polypropylene
- Thickness (Gaskets only)
- 0.125″ (3 mm), 0.200″ (5 mm), (1) 0.200″ (5 mm) & (1) 0.125″ (3 mm), None
See more parts in Polyflow®-G Nominally Rated Depth Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.