22-60740
Pleated polypropylene absolute-rated depth cartridges with superior dirt-holding capacity
Literature
Specifications
- End Fittings
- 226/Fin
- Insert Style
- Encapsulated Polysulfone
- Nominal Length
- 40 in / 1000 mm
Benefits
- Low extractables
- Absolute particle retention provides excellent protection for downstream filters
- Broad chemical compatibility allows use in most applications
- High flow rate, long service life reduces processing time
Applications
- General water filtration
- Beverage/wine clarification
- RO/DI prefiltration
- Waste water
Steam Sterilizable and Sanitizable
Cartridges can be steam sterilized for multiple cycles at 266°F (130°C) or sanitized for at least ten 30-minute cycles with 176°F (80°C) water. They are compatible with most sanitizing agents.
Technical Support and Product Information
Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.
Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Coatings and Inks, Process and Chemical industries.
Note
Specifications are subject to change without notification
Polyflow® is a registered trademark of Parker Hannifin Corporation.
Viton® is registered trademark of E.I. DuPont de Nemours & Co., Inc.
Cuno® is a registered trademark of Cuno Inc.
Line Specifications
- Depth Media Material
- Polypropylene
- Effective Filtration Area per 10 inch (250 mm) Cartridge
- 4.9 ft² / 0.46 m²
- Effective Filtration Area per 5 inch (130 mm) Cartridge
- 2.4 ft² / 0.22 m²
- Filter Rating
- 0.6, 1.2, 2.5, 5.0, 10.0, 20.0, 40.0 µm
- Filtration Cleanliness
- Cartridge extractables NVR < 35 mg per 10 inch (250 mm) cartridge
- Filtration Ratings
- The 0.6 µm offers typical retention up to 99% efficiency. 1.2 µm, 2.5 µm, 5 µm, 10µm, 20 µm, and 40 µm are up to 99.9% efficient at specified pore size
- Gasket/O-Ring Material
- Buna N, EPDM, FEP Encapsulated Silicone (O-Rings only), FEP Encapsulated Viton® (O-Rings only), None, Silicone, Viton®
- Maximum Forward Differential Pressure/Temperature @ 75°F (24°C)
- 5.5 bar / 80 psid
- Maximum Operating Temperature
- 71 °C / 160 °F
- Maximum Reverse Differential Pressure/Temperature @ 140°F (60°C)
- 1.0 bar / 15 psid
- Maximum Reverse Differential Pressure/Temperature @ 75°F (24°C)
- 2.8 bar / 40 psid
- Structure
- Polypropylene
- Support Layers
- Polypropylene
- Thickness (Gaskets only)
- 0.125″ (3 mm), 0.200″ (5 mm), (1) 0.200″ (5 mm) & (1) 0.125″ (3 mm), No Gasket
- Typical Water Flow Rates
- 0.6 µm – 4.2 gpm/psid (23.3 lpm/100 mbar), 1.2 µm – 5.0 gpm/psid (27.4 lpm/100 mbar), 2.5 µm – 13.5 gpm/psid (74.1 lpm/100 mbar), 5.0 µm – 26.0 gpm/psid (142.7 lpm/100 mbar), 10.0 µm – 40.0 gpm/psid (219.6 lpm/100 mbar), 20.0 µm – 50.0 gpm/psid (274.4 lpm/100 mbar), 40.0 µm – 60.0 gpm/psid (329.3 lpm/100 mbar)
See more parts in Polyflow® Absolute Rated Depth Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.