PXD3009F
Part of Poly-Mate™ PM/PXD Cartridges
Quality and economical filtration for food and beverage applications
Literature
Specifications
- Cage Material
- Polypropylene Cage
- Cartridge Code
- Xtra Duty
- Flow Factors (psid/gpm @ 1 cks) per 10" Cartridge
- 0.0048
- Maximum ΔP @ 200°F (93°C)
- 2.4 bar / 35 psid
- Maximum ΔP @ 70°F (21°C)
- 6.1 bar / 90 psid
- Nominal Length
- 9 5/8 in / 244 mm
- Particle Removal Rating
- 30.0 µm
- Special Options
- Bubble-Point Test, DI Water Rinse (5 minutes), Individual Poly Bag only, Individual Poly Bag 15/ctn. (20″,30″,40″), Individual Poly bag 30/ctn. (10″)
- Support Construction
- Glass Filled Polypropylene
- Support Core Material
- Glass-Filled Polypropylene
Benefits
- High efficiency rated for critical food and beverage applications (99% efficiency)
- High pleated surface area for extended service life, low pressure drop and high flow capacity
- Optional stainless steel O-ring adapter inserts provide added strength for in situ sterilization. Poly-Mate™ Xtra Duty cartridges are available with backwashable construction, reducing replacement maintenance and cartridge disposal costs
- Poly-Mate™ Xtra Duty (PXD) cartridge features glass-filled polypropylene core for high temperature and high pressure use with rigid outer cage supporting pleated media in backwash applications
- All materials of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21.
- One-piece, continuous to 40 in length, integrally sealed, pleated filter media
Applications
- Food & Beverage
- Deionized water
- R.O. membrane prefiltration
- Process water
Technical Support and Product Information
Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.
Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Coatings and Inks, Process and Chemical industries.
Note
Specifications are subject to change without notification.
Poly-Mate™ is a trademark of Parker Hannifin Corporation.
Viton® is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
Line Specifications
- Changeout ΔP
- 2.4 bar / 35 psid
- Effective Filtration Area per 10 inch (254 mm)
- Up to 6.0 ft² / 0.6 m²
- End Cap Configuration
- 020 O-Ring/Recessed Cap, 120 O-Ring/Recessed Cap, 213 O-Ring/Recessed Cap, 222 O-Ring/Fin, 222 O-Ring/Flat Cap, 226 O-Ring/Fin, 226 O-Ring/Flat Cap, DOE with Core Extender, Double Open End (DOE), Ext. Core Open End/ Polypro Spring Closed End, S.S. Inserted 222 O-Ring/Closed, S.S. Inserted 226 O-Ring/Closed, S.S. Inserted 226 O-Ring/Fin, Std. Open End/ Polypro Spring Closed End
- Filter Media Material
- Polypropylene
- Filtration Ratings
- 99 %
- Maximum Recommended Flow Rate per 10" Length (254 mm)
- 10 gpm / 9.5 lpm
- Maximum Temperature
- 93 °C / 200 °F
- Seal Material
- Buna-N, EPR, No Seal Material, PFA Encapsulated Viton® (O-Ring only), Polyethylene Foam (DOE Gasket only), Silicone, Viton®
- Support Layers
- Polypropylene
See more parts in Poly-Mate™ PM/PXD Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.