Memtrex™ PM Pleated Filters with Polypropylene Membrane

Memtrex PM (MPM) filters’ 100% polypropylene construction offers low extractables, long service life and broad chemical compatibility (Figure 1).

Product CatalogPleated Filter Cartridges

Memtrex PM (MPM) filters’ 100% polypropylene construction offers low extractables, long service life and broad chemical compatibility (Figure 1). Thermoplastic sealing techniques are used in the cartridge construction eliminating the need for glues or sealers which could leach contaminates. MPM filters are integrity testable. All components are made of FDA-acceptable materials and meet the test criteria for the USP24 Class VI 121°C plastics.

MPM filters utilize high flow polypropylene membranes, capable of protecting your gas, air, and liquid processes with absolute ratings of 0.1 and 0.2 micron. GE Water & Process Technologies is your complete source for filters, crossflow membranes, housings and other filtration equipment.

Note

Trademark of General Electric Company; may be registered in one or more countries.

Typical Applications

Memtrex PM filters are specifically designed for pure chemical filtration.

Typical applications include:

Vent and Process Air
Etchants, Photoresists and Developers
Solvents, Acids and Bases
Ultrapure Chemicals

General Properties

Memtrex PM filters are available the following absolute pore size micron ratings: 0.1 and 0.2 µm. Tables 1, 2, 3, 4, 5 and 6 show further details on materials of construction, dimensions, operational limits, integrity testing and flow performance in air and water.

Additional Information

Memtrex PM filters may be autoclaved or in situ steam sterilized (up to 253°F [123°C], 30 minute cycles) for a maximum accumulated exposure of 10 hours. Alternatively, the filters may be sanitized with compatible chemical agents.
GE certifies that the materials contained in its Memtrex PM pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR. For further information, contact the GE technical services. Memtrex PM filters meet the test criteria for USP class VI-121°C Plastics.
Aqueous extracts from Memtrex PM filters contain less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.

Request a Quote

Literature

Specifications

Core and Cage: Polypropylene
Effective Filtration Area: 7 ft² / 1 m²
Endcaps and Adapters: Polypropylene
Filtration Media: Polypropylene Membrane
Maximum Forward Differential Pressure @ 70°F (21°C): 4.1 bar / 60 psi
Maximum Operating Temperature at 10 psid (0.7 bar) in Water: 60 °C / 140 °F
Maximum Reverse Differential Pressure @ 70°F (21°C): 2.1 bar / 30 psi
Nominal Inside Diameter: 1.25 in / 31 mm
Nominal Outside Diameter: 2.75 in / 70 mm
Support Layers: Polypropylene Microfiber
Type: MPM

Part Numbers

320 parts available

Part Number	Absolute Micron Rating (µm)	Nominal Cartridge Length (cm / in)	End #1 Adapter	End #2 Adapter	Elastomer Material	Integrity Testing (bar / psi / psig)
MPM911AA	0.1 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911AB	0.1 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911AC	0.1 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911AG	0.1 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911AH	0.1 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911BA	0.1 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911BB	0.1 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911BC	0.1 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911BG	0.1 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911BH	0.1 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911CA	0.1 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911CB	0.1 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911CC	0.1 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911CG	0.1 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911CH	0.1 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911EA	0.1 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911EB	0.1 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911EC	0.1 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911EG	0.1 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911EH	0.1 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911FA	0.1 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911FB	0.1 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911FC	0.1 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911FG	0.1 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911FH	0.1 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911JA	0.1 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911JB	0.1 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911JC	0.1 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911JG	0.1 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911JH	0.1 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911QA	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911QB	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911QC	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911QG	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911QH	0.1 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911ZA	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911ZB	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911ZC	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911ZG	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM911ZH	0.1 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912AA	0.1 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912AB	0.1 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912AC	0.1 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912AG	0.1 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912AH	0.1 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912BA	0.1 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912BB	0.1 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912BC	0.1 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912BG	0.1 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912BH	0.1 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912CA	0.1 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912CB	0.1 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912CC	0.1 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912CG	0.1 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912CH	0.1 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912EA	0.1 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912EB	0.1 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912EC	0.1 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912EG	0.1 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912EH	0.1 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912FA	0.1 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912FB	0.1 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912FC	0.1 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912FG	0.1 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912FH	0.1 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912JA	0.1 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912JB	0.1 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912JC	0.1 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912JG	0.1 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912JH	0.1 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912QA	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912QB	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912QC	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912QG	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912QH	0.1 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912ZA	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912ZB	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912ZC	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912ZG	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM912ZH	0.1 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913AA	0.1 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913AB	0.1 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913AC	0.1 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913AG	0.1 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913AH	0.1 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913BA	0.1 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913BB	0.1 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913BC	0.1 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913BG	0.1 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913BH	0.1 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913CA	0.1 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913CB	0.1 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913CC	0.1 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913CG	0.1 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913CH	0.1 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913EA	0.1 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913EB	0.1 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913EC	0.1 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913EG	0.1 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913EH	0.1 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913FA	0.1 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913FB	0.1 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913FC	0.1 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913FG	0.1 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913FH	0.1 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913JA	0.1 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913JB	0.1 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913JC	0.1 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913JG	0.1 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913JH	0.1 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913QA	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913QB	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913QC	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913QG	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913QH	0.1 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913ZA	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913ZB	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913ZC	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913ZG	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM913ZH	0.1 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914AA	0.1 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914AB	0.1 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914AC	0.1 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914AG	0.1 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914AH	0.1 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914BA	0.1 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914BB	0.1 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914BC	0.1 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914BG	0.1 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914BH	0.1 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914CA	0.1 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914CB	0.1 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914CC	0.1 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914CG	0.1 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914CH	0.1 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914EA	0.1 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914EB	0.1 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914EC	0.1 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914EG	0.1 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914EH	0.1 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914FA	0.1 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914FB	0.1 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914FC	0.1 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914FG	0.1 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914FH	0.1 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914JA	0.1 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914JB	0.1 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914JC	0.1 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914JG	0.1 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914JH	0.1 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914QA	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914QB	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914QC	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914QG	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914QH	0.1 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914ZA	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914ZB	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914ZC	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914ZG	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM914ZH	0.1 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.76 bar / ≤ 5 cc/min at 40 psi
MPM921AA	0.2 µm	25.4 cm / 10 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921AB	0.2 µm	25.4 cm / 10 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921AC	0.2 µm	25.4 cm / 10 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921AG	0.2 µm	25.4 cm / 10 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921AH	0.2 µm	25.4 cm / 10 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921BA	0.2 µm	25.4 cm / 10 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921BB	0.2 µm	25.4 cm / 10 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921BC	0.2 µm	25.4 cm / 10 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921BG	0.2 µm	25.4 cm / 10 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921BH	0.2 µm	25.4 cm / 10 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921CA	0.2 µm	25.4 cm / 10 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921CB	0.2 µm	25.4 cm / 10 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921CC	0.2 µm	25.4 cm / 10 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921CG	0.2 µm	25.4 cm / 10 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921CH	0.2 µm	25.4 cm / 10 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921EA	0.2 µm	25.4 cm / 10 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921EB	0.2 µm	25.4 cm / 10 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921EC	0.2 µm	25.4 cm / 10 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921EG	0.2 µm	25.4 cm / 10 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921EH	0.2 µm	25.4 cm / 10 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921FA	0.2 µm	25.4 cm / 10 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921FB	0.2 µm	25.4 cm / 10 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921FC	0.2 µm	25.4 cm / 10 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921FG	0.2 µm	25.4 cm / 10 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921FH	0.2 µm	25.4 cm / 10 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921JA	0.2 µm	25.4 cm / 10 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921JB	0.2 µm	25.4 cm / 10 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921JC	0.2 µm	25.4 cm / 10 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921JG	0.2 µm	25.4 cm / 10 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921JH	0.2 µm	25.4 cm / 10 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921QA	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921QB	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921QC	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921QG	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921QH	0.2 µm	25.4 cm / 10 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921ZA	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921ZB	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921ZC	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921ZG	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM921ZH	0.2 µm	25.4 cm / 10 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922AA	0.2 µm	50.8 cm / 20 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922AB	0.2 µm	50.8 cm / 20 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922AC	0.2 µm	50.8 cm / 20 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922AG	0.2 µm	50.8 cm / 20 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922AH	0.2 µm	50.8 cm / 20 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922BA	0.2 µm	50.8 cm / 20 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922BB	0.2 µm	50.8 cm / 20 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922BC	0.2 µm	50.8 cm / 20 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922BG	0.2 µm	50.8 cm / 20 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922BH	0.2 µm	50.8 cm / 20 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922CA	0.2 µm	50.8 cm / 20 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922CB	0.2 µm	50.8 cm / 20 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922CC	0.2 µm	50.8 cm / 20 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922CG	0.2 µm	50.8 cm / 20 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922CH	0.2 µm	50.8 cm / 20 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922EA	0.2 µm	50.8 cm / 20 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922EB	0.2 µm	50.8 cm / 20 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922EC	0.2 µm	50.8 cm / 20 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922EG	0.2 µm	50.8 cm / 20 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922EH	0.2 µm	50.8 cm / 20 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922FA	0.2 µm	50.8 cm / 20 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922FB	0.2 µm	50.8 cm / 20 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922FC	0.2 µm	50.8 cm / 20 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922FG	0.2 µm	50.8 cm / 20 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922FH	0.2 µm	50.8 cm / 20 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922JA	0.2 µm	50.8 cm / 20 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922JB	0.2 µm	50.8 cm / 20 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922JC	0.2 µm	50.8 cm / 20 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922JG	0.2 µm	50.8 cm / 20 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922JH	0.2 µm	50.8 cm / 20 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922QA	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922QB	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922QC	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922QG	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922QH	0.2 µm	50.8 cm / 20 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922ZA	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922ZB	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922ZC	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922ZG	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM922ZH	0.2 µm	50.8 cm / 20 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923AA	0.2 µm	76 cm / 30 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923AB	0.2 µm	76 cm / 30 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923AC	0.2 µm	76 cm / 30 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923AG	0.2 µm	76 cm / 30 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923AH	0.2 µm	76 cm / 30 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923BA	0.2 µm	76 cm / 30 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923BB	0.2 µm	76 cm / 30 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923BC	0.2 µm	76 cm / 30 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923BG	0.2 µm	76 cm / 30 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923BH	0.2 µm	76 cm / 30 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923CA	0.2 µm	76 cm / 30 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923CB	0.2 µm	76 cm / 30 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923CC	0.2 µm	76 cm / 30 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923CG	0.2 µm	76 cm / 30 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923CH	0.2 µm	76 cm / 30 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923EA	0.2 µm	76 cm / 30 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923EB	0.2 µm	76 cm / 30 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923EC	0.2 µm	76 cm / 30 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923EG	0.2 µm	76 cm / 30 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923EH	0.2 µm	76 cm / 30 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923FA	0.2 µm	76 cm / 30 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923FB	0.2 µm	76 cm / 30 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923FC	0.2 µm	76 cm / 30 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923FG	0.2 µm	76 cm / 30 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923FH	0.2 µm	76 cm / 30 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923JA	0.2 µm	76 cm / 30 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923JB	0.2 µm	76 cm / 30 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923JC	0.2 µm	76 cm / 30 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923JG	0.2 µm	76 cm / 30 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923JH	0.2 µm	76 cm / 30 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923QA	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923QB	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923QC	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923QG	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923QH	0.2 µm	76 cm / 30 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923ZA	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923ZB	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923ZC	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923ZG	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM923ZH	0.2 µm	76 cm / 30 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924AA	0.2 µm	101.5 cm / 40 in	Open End Gasket	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924AB	0.2 µm	101.5 cm / 40 in	Open End Gasket	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924AC	0.2 µm	101.5 cm / 40 in	Open End Gasket	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924AG	0.2 µm	101.5 cm / 40 in	Open End Gasket	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924AH	0.2 µm	101.5 cm / 40 in	Open End Gasket	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924BA	0.2 µm	101.5 cm / 40 in	120 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924BB	0.2 µm	101.5 cm / 40 in	120 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924BC	0.2 µm	101.5 cm / 40 in	120 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924BG	0.2 µm	101.5 cm / 40 in	120 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924BH	0.2 µm	101.5 cm / 40 in	120 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924CA	0.2 µm	101.5 cm / 40 in	213 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924CB	0.2 µm	101.5 cm / 40 in	213 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924CC	0.2 µm	101.5 cm / 40 in	213 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924CG	0.2 µm	101.5 cm / 40 in	213 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924CH	0.2 µm	101.5 cm / 40 in	213 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924EA	0.2 µm	101.5 cm / 40 in	222 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924EB	0.2 µm	101.5 cm / 40 in	222 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924EC	0.2 µm	101.5 cm / 40 in	222 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924EG	0.2 µm	101.5 cm / 40 in	222 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924EH	0.2 µm	101.5 cm / 40 in	222 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924FA	0.2 µm	101.5 cm / 40 in	226 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924FB	0.2 µm	101.5 cm / 40 in	226 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924FC	0.2 µm	101.5 cm / 40 in	226 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924FG	0.2 µm	101.5 cm / 40 in	226 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924FH	0.2 µm	101.5 cm / 40 in	226 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924JA	0.2 µm	101.5 cm / 40 in	020 O-Ring	Open End Gasket	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924JB	0.2 µm	101.5 cm / 40 in	020 O-Ring	120 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924JC	0.2 µm	101.5 cm / 40 in	020 O-Ring	213 O-Ring	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924JG	0.2 µm	101.5 cm / 40 in	020 O-Ring	Closed End Cap	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924JH	0.2 µm	101.5 cm / 40 in	020 O-Ring	Fin Adapter	Silicone, Viton, Buna-N, EPDM	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924QA	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924QB	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924QC	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924QG	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924QH	0.2 µm	101.5 cm / 40 in	222 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924ZA	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Open End Gasket	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924ZB	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	120 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924ZC	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	213 O-Ring	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924ZG	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Closed End Cap	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi
MPM924ZH	0.2 µm	101.5 cm / 40 in	226 O-Ring Stainless Steel Insert	Fin Adapter	Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton	≤ 5 cc/min at 2.07 bar / ≤ 5 cc/min at 30 psi

Request a Quote

Select up to five part numbers in the table above, or tell us what you need and our specialists will help you choose.

This part number is already on the request. Tell us how many you need and our specialists will come back to you.

Filtration & Separation+

Pure Water Solutions+

Water Technologies+

Memtrex™ PM Pleated Filters with Polypropylene Membrane

Note

Typical Applications

General Properties

Additional Information

Literature

Specifications

Part Numbers

Request a Quote