MPC921CG
Part of Memtrex™ PC Pleated Filters with Polycarbonate Track-etch Membrane
Memtrex PC (MPC) filters’ (Figure 1) unique polycarbonate track-etch membrane leads the market for precise filtration, broad chemical compatibility, and fast conductivity and TOC rinse-down in ultrapure water systems.
Literature
Specifications
- Absolute Micron Rating
- 0.2 µm
- Elastomer Material
- Silicone, Viton, Buna-N, EPDM
- End #1 Adapter
- 213 O-Ring
- End #2 Adapter
- Closed End Cap
- Nominal Cartridge Length
- 25 cm / 10 in
Note
Trademark of General Electric Company; may be registered in one or more countries.
Typical Applications
Memtrex PC filters are specifically designed for ultrapure filtration. Typical applications include:
- Pure Chemical Filtration
- Inks and Dyes
- Ultrapure Water Filtration
- Plating Solutions
General Properties
Memtrex PC filters are available the following absolute pore size micron rating: 0.05, 0.1, 0.2 and 0.45 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance.
Additional Information
- The filters may be sanitized with compatible chemical agents.
- Memtrex PC filters meet the test criteria for USP class VI-121°C plastics.
- Aqueous extracts from Memtrex PC filters contain less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues.
- GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
Line Specifications
- Core and Cage
- Polypropylene
- Effective Filtration Area
- 17 ft² / 2 m²
- Endcaps and Adapters
- Polypropylene
- Maximum Forward Differential Pressure @ 70°F (21°C)
- 4.1 bar / 60 psi
- Maximum Operating Temperature at 10 psid (0.69 bar) in Water
- 82 °C / 180 °F
- Maximum Reverse Differential Pressure @ 70°F (21°C)
- 2.07 bar / 30 psi
- Media Material
- Polycarbonate Track-etch Membrane
- Nominal Inside Diameter
- 1.25 in / 31 mm
- Nominal Outside Diameter
- 2.75 in / 70 mm
- Support Layers
- Polypropylene Microfiber
- Type
- MPC
See more parts in Memtrex™ PC Pleated Filters with Polycarbonate Track-etch Membrane
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.