MMP-S924ZHSS
Part of Memtrex™ MP-S Pleated Filters with Polyethersulfone Membrane
Literature
Specifications
- End #1 Adapter
- 226 O-Ring Stainless Steel Support Ring
- End #2 Adapter
- Fin Adapter
- Nominal Cartridge Length
- 102 cm / 40 in
Integrity Testing
Air diffusion per 10″ module after saturation with clean water. <12 cc/min at 40 psig (2.76 bar)
Note
Trademark of General Electric Company; may be registered in one or more countries.
Typical Applications
Memtrex MP-S filters are specifically designed for sterile filtration of pharmaceutical and biological products. Typical applications include:
- Final Filtration of Drugs and Biologicals
- Final Filtration of Water for Injection
- Final Filtration of Pure Water for Dialysis
- LVPs, SVPs
- Diagnostics
- Tissue Culture Media
- Vaccines
General Properties
Memtrex MP-S filters are available the following absolute pore size micron rating: 0.2 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance.
Additional Information
- Memtrex MP-S filters may be autoclaved or in situ steam sterilized (up to 257°F [125°C], 30-minute cycles) for a maximum accumulated exposure of 10 hours. Alternately, the filters may be sanitized with compatible chemical agents.
- GE certifies that the material contained in its Memtrex MP-S pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR. For further information, contact GE technical services. Memtrex MP-S filters meet the test criteria for USP class VI-121°C Plastics.
- Aqueous extracts from Memtrex MP-S filters contain less that 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues.
- GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
Line Specifications
- Absolute Micron Rating
- 0.2 µm
- Core and Cage
- Polypropylene
- Effective Filtration Area
- 7 ft² / 1 m²
- Elastomer Material
- Silicone
- Endcaps and Adapters
- Polypropylene with Stainless Steel Insert
- Grade
- Sterilizing
- Maximum Forward Differential Pressure
- 4.14 bar / 60 psi
- Maximum Operating Temperature at 10 psid (0.69 bar) in Water
- 82 °C / 180 °F
- Maximum Reverse Differential Pressure
- 2.07 bar / 30 psi
- Media Material
- 2 Layers of Hydrophilic Polyethersulfone
- Nominal Inside Diameter
- 1.25 in / 31 mm
- Nominal Outside Diameter
- 2.75 in / 70 mm
- Support Layers
- Polypropylene Microfiber
- Type
- MMP-S
See more parts in Memtrex™ MP-S Pleated Filters with Polyethersulfone Membrane
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.