MMP913ZC
Part of Memtrex™ MP Pleated Filters with Polyethersulfone Membrane
Memtrex MP (MMP) filters (Figure 1), constructed with hydrophilic polyethersulfone membranes and all polypropylene components, exhibit both enhanced throughput and reliable particle retention for superior performance in most applications.
Literature
Specifications
- Absolute Micron Rating
- 0.1 µm
- Elastomer Material
- Silicone, Viton, Buna-N, EPDM, PTFE Encapsulated Viton
- End #1 Adapter
- 226 O-Ring Stainless Steel Support Ring
- End #2 Adapter
- 213 O-Ring
- Nominal Cartridge Length
- 76 cm / 30 in
Integrity Testing
≤ 45 cc/min at 3.4 bar / ≤ 45 cc/min at 50 psig
Note
Trademark of General Electric Company; may be registered in one or more countries.
Typical Applications
MMP filters are suitable for a broad range of applications, including filtration of:
- Inks and dyes
- Acids, bases, and oxidants
- Process water
- Pharmaceutical preparations
- Serums and tissue culture media
General Properties
Memtrex MP filters are available the following absolute pore size micron ratings: 0.1, 0.2, 0.45 and 0.65 µm. Tables 1, 2, 3, 4 and 5 show further details on materials of construction, dimensions, operational limits, integrity testing and flow performance.
Additional Information
- Memtrex MP filters may be autoclaved or in situ steam sterilized (up to 257°F [125°C], 30-minute cycles) for a maximum accumulated exposure of 10 hours. Filters which are steam sterilized must have stainless steel insert supported o-ring adaptors. Alternatively, the filters may be sanitized with compatible chemical agents.
- GE certifies that the material contained in its Memtrex MP pleated filters meet U.S. FDA requirements for food contact under the applicable regulations in 21 CFR. For further information, contact GE technical services. Memtrex MP filters meet the test criteria for USP class VI-121°C Plastics
- Aqueous extracts from Memtrex MP filters contain less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues.
- GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
Line Specifications
- Core and Cage
- Polypropylene
- Effective Filtration Area
- 8 ft² / 1 m²
- Endcaps and Adapters
- Polypropylene
- Filtration Media
- Hydrophilic Polyethersulfone Membrane
- Maximum Forward Differential Pressure @ 70°F (21°C)
- 4.2 bar / 60 psid
- Maximum Operating Temperature at 10 psid (0.7 bar) in Water
- 82 °C / 180 °F
- Maximum Reverse Differential Pressure @ 70°F (21°C)
- 2.1 bar / 30 psid
- Nominal Inside Diameter
- 1.25 in / 31 mm
- Nominal Outside Diameter
- 2.75 in / 70 mm
- Support Layers
- Polypropylene Microfiber
See more parts in Memtrex™ MP Pleated Filters with Polyethersulfone Membrane
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.