HPF 75-39 XX
The Hypure PF filter is a resin-bonded, spiral wound filter cartridge suitable for a wide range of applications.
Specifications
- Elastomer Material
- 1
- End #1 Adapter
- Standard Plain End (No Gasket)
- End #2 Adapter
- Plain End (No Gasket)
- Length
- 99.1 cm / 39 in
- Nominal Micron Rating
- 75 µm
Note
Trademark of General Electric Company; may be registered in one or more countries.
Features and Benefits
- High dirt holding capacity
- Wide range of micron retention
- Faster flow rates
- High efficiency
- Less change-outs
- Consistent quality
Applications
- Printing inks
- Water
- Hot, non-aqueous fluids
- Adhesives
- Antifreeze
- Insecticides
- Photo resists
- Solvents
- Paints and varnishes
- Thinners
- Fuels and Lubricating oils
- Coolants
- Coatings
Materials of Construction
Phenolic resin impregnated, wound polyester fibers with coreless construction.
Operational Limits
Maximum Temperature Rating: 250°F (121°C) in gases
180°F (82°C) in aqueous and non-aqueous liquids
Non Aqueous Liquids
To size a housing, determine several variables: the desired micron size, the pressure drop permitted, the maximum flow rate and the fluid viscosity. If any three are known, the fourth may be plotted on the nomograph above. Example:
- Draw a line from the desired Micron Size (Cartridge Type) through the desired initial Pressure Drop to intersect with Index Line.
- Draw a second line from Fluid Viscosity through the Index Line intersection to determine the recommended Flow Rate
- Read Flow Rate in GPM. (See Figure 1)
Line Specifications
- Elastomer Material
- 1
- Inside Diameter
- 2.5 cm / 1 in
- Outside Diameter
- 6.4 cm / 2.5 in
- Type
- HPF
See more parts in Hypure PF Resin Bonded Filter Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.