HL2540TM
The H-Series proprietary thin-film nanofiltration membrane elements are characterized by an approximate molecular weight cut-off of 150-300 daltons for uncharged organic molecules. Divalent and multivalent ion rejection is dependent upon feed concentration and composition.
Literature
Specifications
- Active Area
- 27 ft² / 2.5 m²
- Boxed Weight
- 2.3 kg / 5 lb
- Dimension B
- OD: 1.90 cm / 0.75 in
- Dimension C (Outside Diameter)
- 6.1 cm / 2.4 in
- Flow Average
- 3.0 m³/day / 780 gpd
- Outer Wrap
- Tape
- Part Number
- 1207231
- Salt Rejection Average (MgSO<sub>4</sub>)
- 98.0 %
Note
Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%.
Testing conditions: 2,000ppm MgSO4 solution at 100psig (690 kPa) operating pressure, 77°F, pH7.5 and 15% recovery.
Note
This product ships dry.
Trademark of General Electric Company; may be registered in one or more countries
Line Specifications
- Chlorine Tolerance
- 1,000+ ppm-hours, Dechlorination Recommended
- Cleaning Range Recommended pH
- 2.0 – 10.5
- Dimension A (Length)
- 101.6 cm / 40.0 in
- Feedwater
- NTU < 1, SDI < 5
- Maximum Cleaning Temperature
- 40 °C / 104 °F
- Maximum Operating Temperature
- 50 °C / 122 °F
- Maximum Pressure (Other Outerwrap)
- 4140 kPa / 600 psig
- Maximum Pressure (Tape Elements)
- 3103 kPa / 450 psig
- Membrane
- H-Series, Thin-Film Membrane (TFM™)
- Operating Range Recommended pH
- 3.0 – 9.0
- Optimum Rejection Recommended pH
- 6.0 – 7.0
- Recommended Pressure Drop Over an Element
- 83 kPa / 12 psig
- Recommended Pressure Drop Per Housing
- 345 kPa / 50 psig
- Salt Rejection Minimum (MgSO<sub>4</sub>)
- 96.0 %
- Typical Operating Flux
- 10 – 20 GFD / 15 – 35 LMH
- Typical Operating Pressure
- 483 – 2069 kPa / 70 – 300 psig
See more parts in HL Series Water Softening NF Elements
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.