GTM*10S00001
Part of GTM Grade PTFE Cartridges
PTFE Membrane Media Filter Cartridges Engineered and Manufactured for Cost Effective Filtration
Literature
Specifications
- 316 SS Ring
- Ring
- Bubble Point
- 22 psig
- Cartridge Length
- 25.4 cm / 10 in
- Flow Rate
- >26 SCFM/psid/10 inch cartridge length, 1.25 gpm/psid/10 inch cartridge length
- Pore size
- 0.10 µm
Note
All materials of construction are FDA accepted. Final assemblies have been validated to pass USP class 6 Toxicology extractable tests, oxidizable substances for plastics, endotoxin level and other quality tests.
Chemical Sanitization
Industry standard concentrations of hydrogen peroxide, peracetic acid, sodium hypochlorite and other selected chemicals. Sanitization protocols designed to extend the useful life of GTM cartridges are available from Critical Process Filtration, Inc.®.
Applications
Final Filtration of:
- Compressed Air
- Solvents
- Pressurized Gases
- Tank Ventilation
Flow Rate
See the Flow Rate table in more image which represents typical water flow and air flow rates. These values are approximations because of the differences in pressure drop encountered in housings and piping systems. Extrapolation to multiple length cartridges in multi-round housings can be done for sizing purposes. Exact flow rates will be installation dependent.
Quality Standards
Our goal is to ensure our customers the greatest possible value for their filtration dollar. We equipment is highly automated, reducing hand operations that achieve both low cost manufacture and high quality by employing state of the art manufacturing equipment. This computer controlled compromise quality. Each operation including assembly, testing, cleaning, drying and packaging is done in appropriately rated clean rooms. Critical Process Filtration manages an ISO 9000 facility that produces validated products to rigorous standards. Manufacturing is controlled using sophisticated MRP software that is networked to work stations in manufacturing centers and inspection points. During the manufacturing and inspection processes, data is collected “real time” from machinery and measuring instruments. This allows variable and attribute data to be quickly and easily analyzed to facilitate constant improvements in both quality and cost.
Total Performance
Critical Process Filtration, Inc.® is a vertically integrated supplier of filtration products and services to industries in which filtration is considered to be a critical part of the manufacturing process. We manufacture a complete line of products to help you achieve all your filtration requirements from a single source.
Line Specifications
- Autoclave
- 250°F (121°C), 30 min, multiple cycles
- Center Core Material
- Polypropylene
- End Caps
- 020 O-ring / Plug, 213/119 Internal O-ring / Plug, 213/119 Internal O-ring DOE, 2-222 O-ring / Flat, 2-222 O-ring / Plug, 2-222 O-ring / Spear, 2-222 O-ring 3 Tab / Flat, 2-222 O-ring 3 Tab / Spear, 2-223 O-ring / Flat, 2-223 O-ring / Spear, 2-226 O-ring / Flat, 2-226 O-ring / Spear, Flat Gasket / Plug, Flat Gasket, DOE
- End Caps Material
- Polypropylene
- Filtered Hot Water
- 90 °C / 194 °F
- Filtration Area Per 10" Length
- 7.0 ft² / 0.65 m²
- Filtration Media
- PTFE
- Filtration Media Support Material
- Polypropylene
- Forward Differential Pressure at 20°C
- 3.4 bar / 50 psi
- In-Line Steam
- 275°F (135°C), 30 min, multiple cycles
- Nominal Length
- 12.7 to 101.6 cm / 5 to 40 in
- Nominal Outside Diameter
- 7.0 cm / 2.75 in
- O-Rings Material
- Buna, EP, PTFE® Encapsulated Silicone, PTFE® Encapsulated Viton®, Silicone, Viton®
- Operating Temperature at 10 psid (0.69 bar) in Water
- 82 °C / 180 °F
- Outer Support Cage Material
- Polypropylene
- Reverse Differential Pressure at 20°C
- 2.7 bar / 40 psi
- Sealing Method
- Thermal Bonding
See more parts in GTM Grade PTFE Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.