33-18304-001
Increased performance all-fluoropolymer cartridge for aggressive applications
Literature
Specifications
- End Fittings
- 222/Flat
- Filter Rating
- 0.10 µm
- Nominal Length
- 4 in / 102 mm
- Temperature Options
- Electronic Standard (150°C Max), High Temperature (180°CMax)
- Typical Water Flow Rates
- 3.2 gpm/psid / 17.6 lpm/100 mbar
Materials of Construction
100% Fluoropolymer construction
All components are thermally bonded to ensure integrity and reduce extractables.
TOC/Resistivity Rinse-Up (Wet-Packed)
TOC recovery within 3-5ppb of feed without additional rinse-up. Resistivity recovery within 0.4 megohm-cm of feed after 22gal @ 1gpm.
Benefits
- Increased filtration area for longer life
- Higher flow rates for increased bath turn over
- Wet-pack option for quick installation
- Ultraclean wet-pack option for absolute cleanliness
- All-fluoropolymer for most maximum chemical resistance
- 100% integrity tested for consistent quality
Applications
- Wet etch and clean.
– Phosphoric acid
– Sulfuric acid
– Hydrofluoric acid
– Nitric acid
– Piranha
– SC1, SC2
– NMP-based solvents
- Other high temperature or ozonated processes
Technical Support and Product Information
Parker Hannifin Corporation provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solution for your application. For more information or to place an order, contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through your nearest Parker Hannifin Corporation office.
Parker Hannifin Corporation designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Industrial and Chemical industries.
Note
Specifications are subject to change without notification
Fluoroflow is a registered trademark of Parker Hannifin Corporation.
Viton and Kalrez are registered trademarks of E.I. DuPont de Nemours & Co., Inc.
Chemraz is a registered trademark of Green, Tweed Inc.
Line Specifications
- Cleanliness (Particle Shedding)
- Wet-packed: 0.2µm after 7gal at 1gpm
- Effective Filtration Area per 10 inch (250 mm) Cartridge
- 9.8 ft² / 0.91 m²
- Effective Filtration Area per 4 inch (100 mm) Cartridge
- 4.8 ft² / 0.45 m²
- Maximum Forward Differential Pressure/Temperature @ 167°F (75°C)
- 3.8 bar / 55 psid
- Maximum Forward Differential Pressure/Temperature @ 167°F (75°C) (HT Option)
- 5.1 bar / 75 psid
- Maximum Forward Differential Pressure/Temperature @ 257°F (125°C)
- 2.0 bar / 30 psid
- Maximum Forward Differential Pressure/Temperature @ 257°F (125°C) (HT Option)
- 3.4 bar / 50 psid
- Maximum Forward Differential Pressure/Temperature @ 300°F (150°C)
- 1.0 bar / 15 psid
- Maximum Forward Differential Pressure/Temperature @ 356°F (180°C) (HT Option)
- 1.0 bar / 15 psid
- Maximum Forward Differential Pressure/Temperature @ 75°F (24°C)
- 5.5 bar / 80 psid
- Maximum Forward Differential Pressure/Temperature @ 75°F (24°C) (HT Option)
- 6.8 bar / 100 psid
- Maximum Reverse Differential Pressure/Temperature @ 250°F (121°C)
- 1.0 bar / 15 psid
- Maximum Reverse Differential Pressure/Temperature @ 75°F (24°C)
- 3.4 bar / 50 psid
- Metals Extractables
- Standard: < 20ppb (total), Ultraclean: < 5ppb (total)
- O-Rings Material
- Chemraz®, FEP-Encapsulated Silicone, FEP-Encapsulated Viton, Kalrez, None, Silicone, Viton®
- Treatment Options
- Ozone UPW Flush and Dried, Ultraclean (Pre-Wet), UPW Flush and Dried, Wet Packed
See more parts in Fluoroflow®-HSA Filter Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.