FHR252FAV
Part of Flotrex™ HR Pleated Filters with Halar (ECTFE) Microfiber
Flotrex-HR (FHR) filters (Figure 1) are made entirely from Halar (ECTFE) (Halar is a trademark of Ausimont.), an industrial-grade fluoropolymer with excellent solvent resistance.
Literature
Specifications
- Absolute Micron Rating
- 25 µm
- Elastomer Material
- Viton
- End #1 Adapter
- 226 O-Ring
- End #2 Adapter
- Open End Gasket
- Nominal Cartridge Length
- 51 cm / 20 in
Note
Trademark of General Electric Company; may be registered in one or more countries
Typical Applications
FHR all-Halar, melt-blown fiber filters offer outstanding performance in extremely harsh chemical environments. These FHR filters also provide cost-effective, absolute filtration at high flow rates. Available in a range of 3, 10 and 25 µm, FHR filters are manufactured and packaged in a cleanroom environment for assured cleanliness. FHR filters are designed for both pre- and final filtration. Typical applications include:
- Filtration of aggressive chemicals including Toluene and Xylene
- Filtration of Ozonated Water
- Beverage
General Properties
Flotrex-HR filters are available the following absolute pore size micron ratings: 3, 10 and 25 µm. Tables 1, 2, 3 and 4 show further details on materials of construction, dimensions, operational limits and flow performance.
Additional Information
- Flotrex-HR filters may be sanitized with compatible chemical agents such as ozonated water. The filters must not be autoclaved or steam sterilized.
- Flotrex-HR filters meet the test criteria for USP24 class VI-121°C plastics and pass the MEM Elution Cytotoxicity Test.
- Aqueous extracts from Flotrex-HR filters contains less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues. FHR filters are ozone tolerant for 9,000 ppm/hr with no extractables.
Line Specifications
- Core and Cage
- Halar
- Effective Filtration Area
- 8 ft² / 1 m²
- Endcaps and Adapters
- Halar
- Maximum Forward Differential Pressure @ 70°F (21°C)
- 4.1 bar / 60 psi
- Maximum Operating Temperature at 10 psid (0.69 bar) in Water
- 82 °C / 180 °F
- Maximum Reverse Differential Pressure @ 70°F (21°C)
- 2.1 bar / 30 psi
- Media Material
- Halar Microfiber
- Nominal Inside Diameter
- 1.25 in / 31 mm
- Nominal Outside Diameter
- 2.75 in / 70 mm
- Support Layers
- Halar
- Type
- FHR
See more parts in Flotrex™ HR Pleated Filters with Halar (ECTFE) Microfiber
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.