NA300KU05C16
Depth Filter Modules for Critical Hydraulic Fluids
Literature
Description
The DEPTH-CLEAR U Series is designed for the removal of carbon particles and low levels of moisture that result from the break down of dielectric oil. Removal of these contaminants increases the dielectric strength and the service life of the oil.
DEPTH-CLEAR U Series is available in three different grades, NA300, NA600 and NA1000. The NA300 is designed to remove particles above 3.0 micron and offers the highest filtration efficiency. The NA300 is commonly used to remove the finely divided carbon particles found in circuit breakers. The more open NA600 and NA1000 are used on heat-degraded oils found in transformers. The NA1000 is the most open of the utility series and provides higher flow rates and lower pressure drops.
Specifications
- Cartridge Style
- 16
- Diameter
- 28.3 cm / 11 1/8 in
- Filter Area
- 19 ft² / 1.8 m²
- Formulation
- K Grade
- Grade Designation
- 300
- Height
- 27.6 cm / 10 7/8 in
- Maximum Operating Temperature
- 85 °C / 185 °F
- Series
- Utility
- Type
- Handles
Benefits
- U Series modules provide reliable particle retention and long on-stream life cycles.
- The proprietary formulation process used to produce the SA Series results in depth media with exceptionally high moisture retention properties.
- Filter modules are easy to handle and install allowing for quick and easy change-outs.
- Very high surface area per module results in small space requirements for filter housings.
- Filter modules are environmentally safe.
- All SA Series modules are packaged with a desiccant to prevent absorption of moisture prior to use.
Applications
- Transformer Oils
- Dielectric Oils
- Hydraulic Fluids
- Lubrication Oils
- Turbine Oils
- Machine Oil
- Tool Oil
- Quenching Oils
- Silicone Oils
Note
Viton and PTFE are registered trademarks of E.I. duPont de Nemours and Company.
Depth-Clear and The Clear Advantage are trademarks of Clarcor, Inc.
Line Specifications
- Cartridge Straps Material
- Stainless Steel
- Differential Pressure @ 140°F (60°C)
- 2.5 bar / to 35 psid
- End Caps Material
- Polypropylene
- Formulation
- K Grade
- Gasket Material
- Ethylene Propylene, Neoprene, Nitrile, PTFE, Silicone, Viton®
- Maximum Operating Temperature
- 85 °C / 185 °F
- Media Material
- Cellulose Fibers with Inorganic Filter Aids
- Media Type
- Non-Asbestos
- Recommended Change-out Pressure
- 2.04 bar / 30 psid
- Recommended Flow Rate
- 0.5 to 1.0 gpm/ft² / 20 to 40 lpm/m²
See more parts in Depth-Clear™ SA & U Series Depth Filter Modules
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.