CPD999N00001
Commercial Polypropylene Depth Media Filter Cartridges Engineered and Manufactured for Maximum Efficiency and Value
Literature
Specifications
- Cartridge Length
- 25.4 cm / 10 in
- Flow Rate
- > 20 gpm / > 75.70 lpm
- Pore size
- 100.0 µm
Note
All materials of construction are FDA accepted.
Flow Rate
See the Flow Rate table in more image which represents typical water flow at a one psi (69 mbar) pressure differential across a single 10 inch cartridge element. The test fluid is water at ambient temperature. Extrapolation for housings with multiple elements and higher pressure drops is acceptable, but as flows increase the pressure drop of the housing becomes more apparent.
Line Specifications
- 316 SS Ring
- No Ring
- Center Core Material
- Polypropylene
- End Caps
- 213/119 Both Ends, 213/119 w/ Plug, 2-222 O-ring / Flat, 2-222 O-ring with Spear, 2-226 O-ring / Flat, 2-226 O-ring with Spear, Flat Gasket, double open end
- End Caps Material
- Polypropylene
- Filtration Area Per 10" Length
- 6.5 ft² / 0.60 m²
- Filtration Media
- Polypropylene
- Filtration Media Support Material
- Polypropylene
- Forward Differential Pressure at 20°C
- 3.4 bar / 50 psi
- Nominal Length
- 25.4 to 101.6 cm / 10 to 40 in
- Nominal Outside Diameter
- 6.35 cm / 2.50 in
- O-Rings Material
- Buna, EP, PTFE® Encapsulated Silicone, PTFE® Encapsulated Viton®, Silicone, Viton®
- Operating Temperature at 10 psid (0.69 bar) in Water
- 80 °C / 175 °F
- Outer Support Cage Material
- Polypropylene
- Reverse Differential Pressure at 20°C
- 1.4 bar / 20 psi
- Sealing Method
- Thermal Bonding
See more parts in CPD Grade Pleated Polypropylene Depth Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.