Clariflow® Water Service Grade Cartridges

Hydrophilic polyethersulfone (PES) membrane for cost-effective water purification

Product CatalogPleated Filter Cartridges

Clariflow® Water Service Grade cartridges are cost-effective alternatives to Clariflow E and G Grade cartridges for the filtration of a variety of aqueous liquids.

The Water Service cartridge is built around a unique polyethersulfone (PES) membrane that is inherently hydrophilic, and contains no added surfactants or wetting agents. It delivers clean filtrates, flow rates, extended service life and excellent resistance to hydrolysis.

Water Service cartridges are fabricated under clean room conditions.

Note

All components meet USP-XXIV Class VI-121°C criteria and are thermally bonded to assure integrity and purity.

Benefits

Absolute rated membrane
Reliable and cost-effective
Broad chemical compatibility allows use in aqueous applications
Resistance to hydrolysis allows extended use in UPW systems
High flow rate/low differential pressure reduces system wear and tear

Applications

Deionized water filtration
Liquid clarification
Recirculating liquids
Wine and beer clarification
Juices
Bottled water
Process water

Technical Support and Product Information

Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.

Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Coatings and Inks, Process and Chemical industries.

Note

Specifications are subject to change without notification.
Clearflow™ is a trademark of Parker Hannifin Corporation.
Viton® is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
Cuno® is a registered trademark of Cuno Inc.

Request a Quote

Literature

Brochure (PDF, 343 KB)

Specifications

Effective Filtration Area per 10 inch (250 mm) Cartridge: 5.4 ft² / 0.50 m²
Gasket/O-Ring Material: Buna N, Encapsulated Silicone (O-Rings only), Encapsulated Viton® (O-Rings only), EPDM, None, Silicone, Viton®
Maximum Forward Differential Pressure @ 180°F (82°C): 2.8 bar / 40 psid
Maximum Forward Differential Pressure @ 75°F (24°C): 5.5 bar / 80 psid
Maximum Reverse Differential Pressure @ 75°F (24°C): 3.4 bar / 50 psid
Membrane: Polyethersulfone
Structure: Polypropylene
Support Layers: Polypropylene
Thickness (Gaskets only): 0.125″ (3 mm), 0.200″ (5 mm), (1) 0.200″ (5 mm) & (1) 0.125″ (3 mm), No Gasket

Part Numbers

396 parts available

Part Number	Filter Rating (µm)	Insert Style	End Fittings	Nominal Length (cm / in / mm)	Bulk Packaging per Carton	Water Flow Rates (gpm/psid / lpm/100 mbar)
25-100-10-001	0.10 µm	No Insert (Standard)	DOE (CUNO®)	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-100-10-002	0.2 µm	No Insert (Standard)	DOE (CUNO®)	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-100-10-004	0.45 µm	No Insert (Standard)	DOE (CUNO®)	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-100-20-001	0.10 µm	No Insert (Standard)	DOE (CUNO®)	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-100-20-002	0.2 µm	No Insert (Standard)	DOE (CUNO®)	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-100-20-004	0.45 µm	No Insert (Standard)	DOE (CUNO®)	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-100-30-001	0.10 µm	No Insert (Standard)	DOE (CUNO®)	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-100-30-002	0.2 µm	No Insert (Standard)	DOE (CUNO®)	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-100-30-004	0.45 µm	No Insert (Standard)	DOE (CUNO®)	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-100-40-001	0.10 µm	No Insert (Standard)	DOE (CUNO®)	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-100-40-002	0.2 µm	No Insert (Standard)	DOE (CUNO®)	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-100-40-004	0.45 µm	No Insert (Standard)	DOE (CUNO®)	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-101-10-001	0.10 µm	No Insert (Standard)	DOE	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-101-10-002	0.2 µm	No Insert (Standard)	DOE	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-101-10-004	0.45 µm	No Insert (Standard)	DOE	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-101-20-001	0.10 µm	No Insert (Standard)	DOE	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-101-20-002	0.2 µm	No Insert (Standard)	DOE	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-101-20-004	0.45 µm	No Insert (Standard)	DOE	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-101-30-001	0.10 µm	No Insert (Standard)	DOE	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-101-30-002	0.2 µm	No Insert (Standard)	DOE	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-101-30-004	0.45 µm	No Insert (Standard)	DOE	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-101-40-001	0.10 µm	No Insert (Standard)	DOE	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-101-40-002	0.2 µm	No Insert (Standard)	DOE	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-101-40-004	0.45 µm	No Insert (Standard)	DOE	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-102-10-001	0.10 µm	No Insert (Standard)	226/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-102-10-002	0.2 µm	No Insert (Standard)	226/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-102-10-004	0.45 µm	No Insert (Standard)	226/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-102-20-001	0.10 µm	No Insert (Standard)	226/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-102-20-002	0.2 µm	No Insert (Standard)	226/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-102-20-004	0.45 µm	No Insert (Standard)	226/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-102-30-001	0.10 µm	No Insert (Standard)	226/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-102-30-002	0.2 µm	No Insert (Standard)	226/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-102-30-004	0.45 µm	No Insert (Standard)	226/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-102-40-001	0.10 µm	No Insert (Standard)	226/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-102-40-002	0.2 µm	No Insert (Standard)	226/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-102-40-004	0.45 µm	No Insert (Standard)	226/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-103-10-001	0.10 µm	No Insert (Standard)	222/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-103-10-002	0.2 µm	No Insert (Standard)	222/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-103-10-004	0.45 µm	No Insert (Standard)	222/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-103-20-001	0.10 µm	No Insert (Standard)	222/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-103-20-002	0.2 µm	No Insert (Standard)	222/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-103-20-004	0.45 µm	No Insert (Standard)	222/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-103-30-001	0.10 µm	No Insert (Standard)	222/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-103-30-002	0.2 µm	No Insert (Standard)	222/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-103-30-004	0.45 µm	No Insert (Standard)	222/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-103-40-001	0.10 µm	No Insert (Standard)	222/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-103-40-002	0.2 µm	No Insert (Standard)	222/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-103-40-004	0.45 µm	No Insert (Standard)	222/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-106-10-001	0.10 µm	No Insert (Standard)	020/Internal/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-106-10-002	0.2 µm	No Insert (Standard)	020/Internal/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-106-10-004	0.45 µm	No Insert (Standard)	020/Internal/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-106-20-001	0.10 µm	No Insert (Standard)	020/Internal/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-106-20-002	0.2 µm	No Insert (Standard)	020/Internal/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-106-20-004	0.45 µm	No Insert (Standard)	020/Internal/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-106-30-001	0.10 µm	No Insert (Standard)	020/Internal/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-106-30-002	0.2 µm	No Insert (Standard)	020/Internal/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-106-30-004	0.45 µm	No Insert (Standard)	020/Internal/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-106-40-001	0.10 µm	No Insert (Standard)	020/Internal/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-106-40-002	0.2 µm	No Insert (Standard)	020/Internal/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-106-40-004	0.45 µm	No Insert (Standard)	020/Internal/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-107-10-001	0.10 µm	No Insert (Standard)	226/Fin	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-107-10-002	0.2 µm	No Insert (Standard)	226/Fin	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-107-10-004	0.45 µm	No Insert (Standard)	226/Fin	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-107-20-001	0.10 µm	No Insert (Standard)	226/Fin	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-107-20-002	0.2 µm	No Insert (Standard)	226/Fin	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-107-20-004	0.45 µm	No Insert (Standard)	226/Fin	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-107-30-001	0.10 µm	No Insert (Standard)	226/Fin	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-107-30-002	0.2 µm	No Insert (Standard)	226/Fin	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-107-30-004	0.45 µm	No Insert (Standard)	226/Fin	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-107-40-001	0.10 µm	No Insert (Standard)	226/Fin	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-107-40-002	0.2 µm	No Insert (Standard)	226/Fin	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-107-40-004	0.45 µm	No Insert (Standard)	226/Fin	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-108-10-001	0.10 µm	No Insert (Standard)	222/Fin	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-108-10-002	0.2 µm	No Insert (Standard)	222/Fin	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-108-10-004	0.45 µm	No Insert (Standard)	222/Fin	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-108-20-001	0.10 µm	No Insert (Standard)	222/Fin	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-108-20-002	0.2 µm	No Insert (Standard)	222/Fin	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-108-20-004	0.45 µm	No Insert (Standard)	222/Fin	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-108-30-001	0.10 µm	No Insert (Standard)	222/Fin	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-108-30-002	0.2 µm	No Insert (Standard)	222/Fin	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-108-30-004	0.45 µm	No Insert (Standard)	222/Fin	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-108-40-001	0.10 µm	No Insert (Standard)	222/Fin	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-108-40-002	0.2 µm	No Insert (Standard)	222/Fin	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-108-40-004	0.45 µm	No Insert (Standard)	222/Fin	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10G-10-001	0.10 µm	No Insert (Standard)	120/Internal/Recessed	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10G-10-002	0.2 µm	No Insert (Standard)	120/Internal/Recessed	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10G-10-004	0.45 µm	No Insert (Standard)	120/Internal/Recessed	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10G-20-001	0.10 µm	No Insert (Standard)	120/Internal/Recessed	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10G-20-002	0.2 µm	No Insert (Standard)	120/Internal/Recessed	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10G-20-004	0.45 µm	No Insert (Standard)	120/Internal/Recessed	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10G-30-001	0.10 µm	No Insert (Standard)	120/Internal/Recessed	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10G-30-002	0.2 µm	No Insert (Standard)	120/Internal/Recessed	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10G-30-004	0.45 µm	No Insert (Standard)	120/Internal/Recessed	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10G-40-001	0.10 µm	No Insert (Standard)	120/Internal/Recessed	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10G-40-002	0.2 µm	No Insert (Standard)	120/Internal/Recessed	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10G-40-004	0.45 µm	No Insert (Standard)	120/Internal/Recessed	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10H-10-001	0.10 µm	No Insert (Standard)	213 Internal/Recessed Endcap	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10H-10-002	0.2 µm	No Insert (Standard)	213 Internal/Recessed Endcap	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10H-10-004	0.45 µm	No Insert (Standard)	213 Internal/Recessed Endcap	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10H-20-001	0.10 µm	No Insert (Standard)	213 Internal/Recessed Endcap	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10H-20-002	0.2 µm	No Insert (Standard)	213 Internal/Recessed Endcap	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10H-20-004	0.45 µm	No Insert (Standard)	213 Internal/Recessed Endcap	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10H-30-001	0.10 µm	No Insert (Standard)	213 Internal/Recessed Endcap	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10H-30-002	0.2 µm	No Insert (Standard)	213 Internal/Recessed Endcap	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10H-30-004	0.45 µm	No Insert (Standard)	213 Internal/Recessed Endcap	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10H-40-001	0.10 µm	No Insert (Standard)	213 Internal/Recessed Endcap	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10H-40-002	0.2 µm	No Insert (Standard)	213 Internal/Recessed Endcap	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10H-40-004	0.45 µm	No Insert (Standard)	213 Internal/Recessed Endcap	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10R-10-001	0.10 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10R-10-002	0.2 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10R-10-004	0.45 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10R-20-001	0.10 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10R-20-002	0.2 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10R-20-004	0.45 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10R-30-001	0.10 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10R-30-002	0.2 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10R-30-004	0.45 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-10R-40-001	0.10 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-10R-40-002	0.2 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-10R-40-004	0.45 µm	No Insert (Standard)	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-500-10-001	0.10 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-500-10-002	0.2 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-500-10-004	0.45 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-500-20-001	0.10 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-500-20-002	0.2 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-500-20-004	0.45 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-500-30-001	0.10 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-500-30-002	0.2 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-500-30-004	0.45 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-500-40-001	0.10 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-500-40-002	0.2 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-500-40-004	0.45 µm	Encapsulated 316 SS Insert	DOE (CUNO®)	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-501-10-001	0.10 µm	Encapsulated 316 SS Insert	DOE	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-501-10-002	0.2 µm	Encapsulated 316 SS Insert	DOE	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-501-10-004	0.45 µm	Encapsulated 316 SS Insert	DOE	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-501-20-001	0.10 µm	Encapsulated 316 SS Insert	DOE	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-501-20-002	0.2 µm	Encapsulated 316 SS Insert	DOE	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-501-20-004	0.45 µm	Encapsulated 316 SS Insert	DOE	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-501-30-001	0.10 µm	Encapsulated 316 SS Insert	DOE	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-501-30-002	0.2 µm	Encapsulated 316 SS Insert	DOE	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-501-30-004	0.45 µm	Encapsulated 316 SS Insert	DOE	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-501-40-001	0.10 µm	Encapsulated 316 SS Insert	DOE	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-501-40-002	0.2 µm	Encapsulated 316 SS Insert	DOE	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-501-40-004	0.45 µm	Encapsulated 316 SS Insert	DOE	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-502-10-001	0.10 µm	Encapsulated 316 SS Insert	226/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-502-10-002	0.2 µm	Encapsulated 316 SS Insert	226/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-502-10-004	0.45 µm	Encapsulated 316 SS Insert	226/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-502-20-001	0.10 µm	Encapsulated 316 SS Insert	226/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-502-20-002	0.2 µm	Encapsulated 316 SS Insert	226/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-502-20-004	0.45 µm	Encapsulated 316 SS Insert	226/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-502-30-001	0.10 µm	Encapsulated 316 SS Insert	226/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-502-30-002	0.2 µm	Encapsulated 316 SS Insert	226/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-502-30-004	0.45 µm	Encapsulated 316 SS Insert	226/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-502-40-001	0.10 µm	Encapsulated 316 SS Insert	226/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-502-40-002	0.2 µm	Encapsulated 316 SS Insert	226/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-502-40-004	0.45 µm	Encapsulated 316 SS Insert	226/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-503-10-001	0.10 µm	Encapsulated 316 SS Insert	222/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-503-10-002	0.2 µm	Encapsulated 316 SS Insert	222/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-503-10-004	0.45 µm	Encapsulated 316 SS Insert	222/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-503-20-001	0.10 µm	Encapsulated 316 SS Insert	222/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-503-20-002	0.2 µm	Encapsulated 316 SS Insert	222/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-503-20-004	0.45 µm	Encapsulated 316 SS Insert	222/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-503-30-001	0.10 µm	Encapsulated 316 SS Insert	222/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-503-30-002	0.2 µm	Encapsulated 316 SS Insert	222/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-503-30-004	0.45 µm	Encapsulated 316 SS Insert	222/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-503-40-001	0.10 µm	Encapsulated 316 SS Insert	222/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-503-40-002	0.2 µm	Encapsulated 316 SS Insert	222/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-503-40-004	0.45 µm	Encapsulated 316 SS Insert	222/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-506-10-001	0.10 µm	Encapsulated 316 SS Insert	020/Internal/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-506-10-002	0.2 µm	Encapsulated 316 SS Insert	020/Internal/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-506-10-004	0.45 µm	Encapsulated 316 SS Insert	020/Internal/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-506-20-001	0.10 µm	Encapsulated 316 SS Insert	020/Internal/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-506-20-002	0.2 µm	Encapsulated 316 SS Insert	020/Internal/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-506-20-004	0.45 µm	Encapsulated 316 SS Insert	020/Internal/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-506-30-001	0.10 µm	Encapsulated 316 SS Insert	020/Internal/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-506-30-002	0.2 µm	Encapsulated 316 SS Insert	020/Internal/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-506-30-004	0.45 µm	Encapsulated 316 SS Insert	020/Internal/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-506-40-001	0.10 µm	Encapsulated 316 SS Insert	020/Internal/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-506-40-002	0.2 µm	Encapsulated 316 SS Insert	020/Internal/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-506-40-004	0.45 µm	Encapsulated 316 SS Insert	020/Internal/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-507-10-001	0.10 µm	Encapsulated 316 SS Insert	226/Fin	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-507-10-002	0.2 µm	Encapsulated 316 SS Insert	226/Fin	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-507-10-004	0.45 µm	Encapsulated 316 SS Insert	226/Fin	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-507-20-001	0.10 µm	Encapsulated 316 SS Insert	226/Fin	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-507-20-002	0.2 µm	Encapsulated 316 SS Insert	226/Fin	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-507-20-004	0.45 µm	Encapsulated 316 SS Insert	226/Fin	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-507-30-001	0.10 µm	Encapsulated 316 SS Insert	226/Fin	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-507-30-002	0.2 µm	Encapsulated 316 SS Insert	226/Fin	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-507-30-004	0.45 µm	Encapsulated 316 SS Insert	226/Fin	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-507-40-001	0.10 µm	Encapsulated 316 SS Insert	226/Fin	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-507-40-002	0.2 µm	Encapsulated 316 SS Insert	226/Fin	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-507-40-004	0.45 µm	Encapsulated 316 SS Insert	226/Fin	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-508-10-001	0.10 µm	Encapsulated 316 SS Insert	222/Fin	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-508-10-002	0.2 µm	Encapsulated 316 SS Insert	222/Fin	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-508-10-004	0.45 µm	Encapsulated 316 SS Insert	222/Fin	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-508-20-001	0.10 µm	Encapsulated 316 SS Insert	222/Fin	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-508-20-002	0.2 µm	Encapsulated 316 SS Insert	222/Fin	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-508-20-004	0.45 µm	Encapsulated 316 SS Insert	222/Fin	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-508-30-001	0.10 µm	Encapsulated 316 SS Insert	222/Fin	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-508-30-002	0.2 µm	Encapsulated 316 SS Insert	222/Fin	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-508-30-004	0.45 µm	Encapsulated 316 SS Insert	222/Fin	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-508-40-001	0.10 µm	Encapsulated 316 SS Insert	222/Fin	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-508-40-002	0.2 µm	Encapsulated 316 SS Insert	222/Fin	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-508-40-004	0.45 µm	Encapsulated 316 SS Insert	222/Fin	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50G-10-001	0.10 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50G-10-002	0.2 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50G-10-004	0.45 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50G-20-001	0.10 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50G-20-002	0.2 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50G-20-004	0.45 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50G-30-001	0.10 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50G-30-002	0.2 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50G-30-004	0.45 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50G-40-001	0.10 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50G-40-002	0.2 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50G-40-004	0.45 µm	Encapsulated 316 SS Insert	120/Internal/Recessed	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50H-10-001	0.10 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50H-10-002	0.2 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50H-10-004	0.45 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50H-20-001	0.10 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50H-20-002	0.2 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50H-20-004	0.45 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50H-30-001	0.10 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50H-30-002	0.2 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50H-30-004	0.45 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50H-40-001	0.10 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50H-40-002	0.2 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50H-40-004	0.45 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50R-10-001	0.10 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50R-10-002	0.2 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50R-10-004	0.45 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50R-20-001	0.10 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50R-20-002	0.2 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50R-20-004	0.45 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50R-30-001	0.10 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50R-30-002	0.2 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50R-30-004	0.45 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-50R-40-001	0.10 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-50R-40-002	0.2 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-50R-40-004	0.45 µm	Encapsulated 316 SS Insert	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-600-10-001	0.10 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-600-10-002	0.2 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-600-10-004	0.45 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-600-20-001	0.10 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-600-20-002	0.2 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-600-20-004	0.45 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-600-30-001	0.10 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-600-30-002	0.2 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-600-30-004	0.45 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-600-40-001	0.10 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-600-40-002	0.2 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-600-40-004	0.45 µm	Encapsulated Polysulfone Insert	DOE (CUNO®)	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-601-10-001	0.10 µm	Encapsulated Polysulfone Insert	DOE	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-601-10-002	0.2 µm	Encapsulated Polysulfone Insert	DOE	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-601-10-004	0.45 µm	Encapsulated Polysulfone Insert	DOE	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-601-20-001	0.10 µm	Encapsulated Polysulfone Insert	DOE	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-601-20-002	0.2 µm	Encapsulated Polysulfone Insert	DOE	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-601-20-004	0.45 µm	Encapsulated Polysulfone Insert	DOE	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-601-30-001	0.10 µm	Encapsulated Polysulfone Insert	DOE	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-601-30-002	0.2 µm	Encapsulated Polysulfone Insert	DOE	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-601-30-004	0.45 µm	Encapsulated Polysulfone Insert	DOE	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-601-40-001	0.10 µm	Encapsulated Polysulfone Insert	DOE	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-601-40-002	0.2 µm	Encapsulated Polysulfone Insert	DOE	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-601-40-004	0.45 µm	Encapsulated Polysulfone Insert	DOE	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-602-10-001	0.10 µm	Encapsulated Polysulfone Insert	226/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-602-10-002	0.2 µm	Encapsulated Polysulfone Insert	226/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-602-10-004	0.45 µm	Encapsulated Polysulfone Insert	226/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-602-20-001	0.10 µm	Encapsulated Polysulfone Insert	226/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-602-20-002	0.2 µm	Encapsulated Polysulfone Insert	226/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-602-20-004	0.45 µm	Encapsulated Polysulfone Insert	226/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-602-30-001	0.10 µm	Encapsulated Polysulfone Insert	226/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-602-30-002	0.2 µm	Encapsulated Polysulfone Insert	226/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-602-30-004	0.45 µm	Encapsulated Polysulfone Insert	226/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-602-40-001	0.10 µm	Encapsulated Polysulfone Insert	226/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-602-40-002	0.2 µm	Encapsulated Polysulfone Insert	226/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-602-40-004	0.45 µm	Encapsulated Polysulfone Insert	226/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-603-10-001	0.10 µm	Encapsulated Polysulfone Insert	222/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-603-10-002	0.2 µm	Encapsulated Polysulfone Insert	222/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-603-10-004	0.45 µm	Encapsulated Polysulfone Insert	222/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-603-20-001	0.10 µm	Encapsulated Polysulfone Insert	222/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-603-20-002	0.2 µm	Encapsulated Polysulfone Insert	222/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-603-20-004	0.45 µm	Encapsulated Polysulfone Insert	222/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-603-30-001	0.10 µm	Encapsulated Polysulfone Insert	222/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-603-30-002	0.2 µm	Encapsulated Polysulfone Insert	222/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-603-30-004	0.45 µm	Encapsulated Polysulfone Insert	222/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-603-40-001	0.10 µm	Encapsulated Polysulfone Insert	222/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-603-40-002	0.2 µm	Encapsulated Polysulfone Insert	222/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-603-40-004	0.45 µm	Encapsulated Polysulfone Insert	222/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-606-10-001	0.10 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-606-10-002	0.2 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-606-10-004	0.45 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-606-20-001	0.10 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-606-20-002	0.2 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-606-20-004	0.45 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-606-30-001	0.10 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-606-30-002	0.2 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-606-30-004	0.45 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-606-40-001	0.10 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-606-40-002	0.2 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-606-40-004	0.45 µm	Encapsulated Polysulfone Insert	020/Internal/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-607-10-001	0.10 µm	Encapsulated Polysulfone Insert	226/Fin	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-607-10-002	0.2 µm	Encapsulated Polysulfone Insert	226/Fin	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-607-10-004	0.45 µm	Encapsulated Polysulfone Insert	226/Fin	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-607-20-001	0.10 µm	Encapsulated Polysulfone Insert	226/Fin	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-607-20-002	0.2 µm	Encapsulated Polysulfone Insert	226/Fin	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-607-20-004	0.45 µm	Encapsulated Polysulfone Insert	226/Fin	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-607-30-001	0.10 µm	Encapsulated Polysulfone Insert	226/Fin	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-607-30-002	0.2 µm	Encapsulated Polysulfone Insert	226/Fin	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-607-30-004	0.45 µm	Encapsulated Polysulfone Insert	226/Fin	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-607-40-001	0.10 µm	Encapsulated Polysulfone Insert	226/Fin	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-607-40-002	0.2 µm	Encapsulated Polysulfone Insert	226/Fin	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-607-40-004	0.45 µm	Encapsulated Polysulfone Insert	226/Fin	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-608-10-001	0.10 µm	Encapsulated Polysulfone Insert	222/Fin	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-608-10-002	0.2 µm	Encapsulated Polysulfone Insert	222/Fin	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-608-10-004	0.45 µm	Encapsulated Polysulfone Insert	222/Fin	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-608-20-001	0.10 µm	Encapsulated Polysulfone Insert	222/Fin	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-608-20-002	0.2 µm	Encapsulated Polysulfone Insert	222/Fin	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-608-20-004	0.45 µm	Encapsulated Polysulfone Insert	222/Fin	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-608-30-001	0.10 µm	Encapsulated Polysulfone Insert	222/Fin	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-608-30-002	0.2 µm	Encapsulated Polysulfone Insert	222/Fin	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-608-30-004	0.45 µm	Encapsulated Polysulfone Insert	222/Fin	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-608-40-001	0.10 µm	Encapsulated Polysulfone Insert	222/Fin	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-608-40-002	0.2 µm	Encapsulated Polysulfone Insert	222/Fin	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-608-40-004	0.45 µm	Encapsulated Polysulfone Insert	222/Fin	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60G-10-001	0.10 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60G-10-002	0.2 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60G-10-004	0.45 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60G-20-001	0.10 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60G-20-002	0.2 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60G-20-004	0.45 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60G-30-001	0.10 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60G-30-002	0.2 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60G-30-004	0.45 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60G-40-001	0.10 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60G-40-002	0.2 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60G-40-004	0.45 µm	Encapsulated Polysulfone Insert	120/Internal/Recessed	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60H-10-001	0.10 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60H-10-002	0.2 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60H-10-004	0.45 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60H-20-001	0.10 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60H-20-002	0.2 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60H-20-004	0.45 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60H-30-001	0.10 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60H-30-002	0.2 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60H-30-004	0.45 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60H-40-001	0.10 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60H-40-002	0.2 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60H-40-004	0.45 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60R-10-001	0.10 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60R-10-002	0.2 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60R-10-004	0.45 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60R-20-001	0.10 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60R-20-002	0.2 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60R-20-004	0.45 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60R-30-001	0.10 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60R-30-002	0.2 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60R-30-004	0.45 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-60R-40-001	0.10 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-60R-40-002	0.2 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-60R-40-004	0.45 µm	Encapsulated Polysulfone Insert	213 Internal/Recessed Endcap (Ametek®)	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A03-10-001	0.10 µm	1/2″ Shortened Filter	222/Flat	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A03-10-002	0.2 µm	1/2″ Shortened Filter	222/Flat	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A03-10-004	0.45 µm	1/2″ Shortened Filter	222/Flat	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A03-20-001	0.10 µm	1/2″ Shortened Filter	222/Flat	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A03-20-002	0.2 µm	1/2″ Shortened Filter	222/Flat	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A03-20-004	0.45 µm	1/2″ Shortened Filter	222/Flat	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A03-30-001	0.10 µm	1/2″ Shortened Filter	222/Flat	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A03-30-002	0.2 µm	1/2″ Shortened Filter	222/Flat	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A03-30-004	0.45 µm	1/2″ Shortened Filter	222/Flat	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A03-40-001	0.10 µm	1/2″ Shortened Filter	222/Flat	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A03-40-002	0.2 µm	1/2″ Shortened Filter	222/Flat	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A03-40-004	0.45 µm	1/2″ Shortened Filter	222/Flat	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A08-10-001	0.10 µm	1/2″ Shortened Filter	222/Fin	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A08-10-002	0.2 µm	1/2″ Shortened Filter	222/Fin	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A08-10-004	0.45 µm	1/2″ Shortened Filter	222/Fin	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A08-20-001	0.10 µm	1/2″ Shortened Filter	222/Fin	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A08-20-002	0.2 µm	1/2″ Shortened Filter	222/Fin	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A08-20-004	0.45 µm	1/2″ Shortened Filter	222/Fin	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A08-30-001	0.10 µm	1/2″ Shortened Filter	222/Fin	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A08-30-002	0.2 µm	1/2″ Shortened Filter	222/Fin	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A08-30-004	0.45 µm	1/2″ Shortened Filter	222/Fin	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A08-40-001	0.10 µm	1/2″ Shortened Filter	222/Fin	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A08-40-002	0.2 µm	1/2″ Shortened Filter	222/Fin	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A08-40-004	0.45 µm	1/2″ Shortened Filter	222/Fin	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A0R-10-001	0.10 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	10 in / 250 mm	28	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A0R-10-002	0.2 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	10 in / 250 mm	28	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A0R-10-004	0.45 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	10 in / 250 mm	28	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A0R-20-001	0.10 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	20 in / 500 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A0R-20-002	0.2 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	20 in / 500 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A0R-20-004	0.45 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	20 in / 500 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A0R-30-001	0.10 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	30 in / 750 mm	12	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A0R-30-002	0.2 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	30 in / 750 mm	12	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A0R-30-004	0.45 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	30 in / 750 mm	12	3.8 gpm/psid / 20.86 lpm/100 mbar
25-A0R-40-001	0.10 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	40 in / 1000 mm	9	1.3 gpm/psid / 7.14 lpm/100 mbar
25-A0R-40-002	0.2 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	40 in / 1000 mm	9	2.6 gpm/psid / 14.27 lpm/100 mbar
25-A0R-40-004	0.45 µm	1/2″ Shortened Filter	213 Internal/Recessed Endcap (Ametek®) 222/Recessed End cap	40 in / 1000 mm	9	3.8 gpm/psid / 20.86 lpm/100 mbar

Request a Quote

Select up to five part numbers in the table above, or tell us what you need and our specialists will help you choose.

This part number is already on the request. Tell us how many you need and our specialists will come back to you.

Filtration & Separation+

Pure Water Solutions+

Water Technologies+

Clariflow® Water Service Grade Cartridges

Note

Benefits

Applications

Technical Support and Product Information

Note

Literature

Specifications

Part Numbers

Request a Quote