25-10330-008
Hydrophilic polyethersulfone (PES) membrane for aqueous liquid filtration applications
Literature
Specifications
- Bulk Packaging per Carton
- 12
- End Fittings
- 222/Flat
- Filter Rating
- 0.8 µm
- Nominal Length
- 30 in / 750 mm
- Water Flow Rates
- 9.5 gpm/psid / 52.16 lpm/100 mbar
Benefits
- Absolute Rated Membrane
- High flow rate reduces processing time
- Broad chemical compatibility allows use in most applications
- Low differential pressure reduces system wear and tear
Applications
- Beverage clarification
- Ingredients and Process liquids
- Water filtration
- Deionized water systems
Technical Support and Product Information
Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.
Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and Beverage, Coatings and Inks, Process and Chemical industries.
Note
Specifications are subject to change without notification.
Clearflow™ is a trademark of Parker Hannifin Corporation.
Viton® is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
Line Specifications
- Effective Filtration Area per 10 inch (250 mm) Cartridge
- 6.8 ft² / 0.63 m²
- Gasket/O-Ring Material
- Buna N, EPDM (Standard), FEP-Encapsulated Silicone (O-Rings only), FEP-Encapsulated Viton® (O-Rings only), None, Silicone, Viton®
- Maximum Forward Differential Pressure/Temperature @ 180°F (82°C)
- 2.8 bar / 40 psid
- Maximum Forward Differential Pressure/Temperature @ 75°F (24°C)
- 5.5 bar / 80 psid
- Maximum Reverse Differential Pressure/Temperature @ 75°F (24°C)
- 3.4 bar / 50 psid
- Membrane
- Polyethersulfone
- Structure
- Polypropylene
- Support Layers
- Polypropylene
- Thickness (Gaskets only)
- 0.125″ (3 mm), 0.200″ (5 mm), (1) 0.200″ (5 mm) & (1) 0.125″ (3 mm), No Gasket
See more parts in Clariflow® General Grade Cartridges
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.