item-5708

Aluminum Bronze

ASME Code Stamp

Copper Nickel

Monel

Stainless Steel

Available only on Eaton Strainers, this unique shaft seal replaces older style packing and prevents troublesome leakage. This idL Seal has a special quad design that keeps the exterior of the strainer dry and clean in service-no process liquid can run down the sides of the strainer.

A common problem in many automatic self-cleaning strainers is inefficient backwashing due to debris lodged in the strainer element. The Model 2596 Strainer features Eaton’s Cenpeller Technology which solves this problem. A unique vane plate is positioned at the inlet of the strainer element where it contacts the process media before it enters the element. The vane causes the incoming liquid to move in a circular motion, forcing the debris to lay up against the surface of the strainer element rather than impinging on the element and lodging in the element’s openings. Lodged debris in the strainer element can negatively impact the differential pressure across the strainer, resulting in a shut down of the strainer while the element is manually cleaned. Cenpeller Technology in the Model 2596 Strainer helps prevent this problem while making backwashing much easier and more efficient.

To simplify maintenance Eaton’s Model 2596 Strainers feature a unitized modular assembly. This means that the motor, gear reducer, and the internal operating mechanism are all housed within the strainer cover and lift off as a unit. This makes all components easily accessible, simplifies maintenance, and reduces associated maintenance costs.

Cast Iron Class 125 Flange (-20° to 150°F) 200 psi (2″- 8″)
Cast Stainless Steel Class 150 Flange (-20° to 100°F) 275 psi (2″- 4″)

DuraWedge is a non-clogging, rugged stainless steel element for the most demanding applications. It is constructed from v shaped profile wire. A wide range of opening sizes is available. Consult Eaton for the proper choice.

A sturdy, economical stainless steel element for general service use. Available perf openings of 1/8″, 1/16″, and 1/32″. Available mesh sizes of 40, 60, 80, 100, and 150 mesh. Consult Eaton for the proper choice.