AG8040F 400 WET
AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired.
Literature
Specifications
- Active Area
- 400 ft² / 37.2 m²
- Boxed Weight
- 16 kg / 35 lb
- Dimension A (Length)
- 101.6 cm / 40.0 in
- Dimension B
- 2.86 cm / 1.125 in
- Dimension C (Outside Diameter)
- 20.1 cm / 7.9 in
- Flow Average
- 39.8 m³/day / 10500 gpd
- Outer Wrap
- Fiberglass
- Part Number
- 1239764
- Salt Rejection Average (NaCl)
- 99.5 %
- Salt Rejection Minimum (NaCl)
- 99.0 %
Note
Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%.
Testing conditions: 2,000 ppm NaCl solution at 225 psig (1,551 kPa) operating pressure, 77 °F, pH 7.5 and 15% recovery.
Note
These elements are shipped dry unless specified WET
Trademark of General Electric Company; may be registered in one or more countries
Line Specifications
- Chlorine Tolerance
- 1,000+ ppm-hours, Dechlorination Recommended
- Cleaning Range Recommended pH
- 2.0 – 11.5
- Feedwater
- NTU < 1, SDI < 5
- Maximum Cleaning Temperature
- 50 °C / 122 °F
- Maximum Operating Temperature
- 50 °C / 122 °F
- Maximum Pressure (Other Outerwrap)
- 4137 kPa / 600 psig
- Maximum Pressure (Tape Elements)
- 3103 kPa / 450 psig
- Membrane
- A-Series, Thin-Film Membrane (TFM™)
- Operating Range Recommended pH
- 4.0 – 11.0
- Optimum Rejection Recommended pH
- 7.0 – 7.5
- Recommended Pressure Drop Over an Element
- 83 kPa / 12 psig
- Recommended Pressure Drop Per Housing
- 345 kPa / 50 psig
- Typical Operating Flux
- 10 – 20 GFD / 15 – 35 LMH
- Typical Operating Pressure
- 1379 kPa / 200 psig
See more parts in AG Series Standard Brackish Water RO Elements
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.