AD4040FM
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by a good sodium chloride rejection.
Literature
Specifications
- Active Area
- 86 ft² / 8.0 m²
- Average Permeate Flow
- 4.2 m³/day / 1100 gpd
- Boxed Weight
- 4 kg / 9 lb
- Dimension B
- OD: 1.90 cm / 0.75 in
- Dimension C (Outside Diameter)
- 9.9 cm / 3.9 in
- Part Number
- 1223378
Note
Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-25%.
Testing conditions: 32,000ppm NaCl solution at 800psi (5,516kPa) operating pressure, 77°F, pH 7.5 and 7% recovery.
Note
These elements are bagged wet before shipping.
Trademark of General Electric Company; may be registered in one or more countries.
Line Specifications
- Average NaCl Rejection
- 99.6 %
- Chlorine Tolerance
- 1,000+ ppm-hours, Dechlorination Recommended
- Clean-In-Place (CIP) pH Range
- 2.0 – 11.5
- Continuous Operation pH Range
- 4.0 – 11.0
- Dimension A (Length)
- 101.6 cm / 40.0 in
- Feedwater
- NTU < 1, SDI < 5
- Maximum Clean-In-Place (CIP) Temperature
- 50 °C / 122 °F
- Maximum Continuous Operation Temperature
- 50 °C / 122 °F
- Maximum Operating Pressure
- 8268 kPa / 1200 psi
- Maximum Pressure Drop Over an Element
- 83 kPa / 12 psi
- Maximum Pressure Drop Per Housing
- 345 kPa / 50 psi
- Membrane
- A-Series, Thin-Film Membrane (TFM™)
- Minimum NaCl Rejection
- 99.2 %
- Optimum Rejection pH Range
- 7.0 – 7.5
- Outer Wrap
- Fiberglass
- Typical Operating Flux
- 7 – 11 GFD / 12 – 19 LMH
- Typical Operating Pressure
- 5516 kPa / 800 psi
See more parts in AD Series Seawater Desalination RO Elements
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.