AD8040F-400 HR
The AD HR series, family of proprietary thin film reverse osmosis membrane elements, is characterized by an excellent sodium chloride rejection. AD HR series is selected when high quality permeate is demanded from seawater that is relatively high in TDS.
Literature
Specifications
- Active Area
- 400 ft² / 37.2 m²
- Average Permeate Flow
- 24.6 m³/day / 6500 gpd
- Boxed Weight
- 16 kg / 35 lb
- Dimension B
- 2.86 cm / 1.125 in
- Dimension C (Outside Diameter)
- 20.1 cm / 7.9 in
- Part Number
- 3037470
Note
Average salt rejection after 24 hours operation. Individual flow rate may vary +25%/-15%.
Testing conditions: 32,000mg/l NaCl solution at 800psi (5,516kPa) operating pressure, 77°F, pH7.5 and 7% recovery.
Note
These elements are bagged wet before shipping.
Trademark of General Electric Company; may be registered in one or more countries.
Line Specifications
- Average NaCl Rejection
- 99.7 %
- Chlorine Tolerance
- 1,000+ ppm-hours, Dechlorination Recommended
- Clean-In-Place (CIP) pH Range
- 2.0 – 11.5
- Continuous Operation pH Range
- 4.0 – 11.0
- Dimension A (Length)
- 101.6 cm / 40.0 in
- Feedwater
- NTU < 1, SDI < 5
- Maximum Clean-In-Place (CIP) Temperature
- 50 °C / 122 °F
- Maximum Continuous Operation Temperature
- 50 °C / 122 °F
- Maximum Operating Pressure
- 8274 kPa / 1200 psi
- Maximum Pressure Drop Over an Element
- 83 kPa / 12 psi
- Maximum Pressure Drop Per Housing
- 345 kPa / 50 psi
- Membrane
- Thin-Film Membrane (TFM™)
- Minimum NaCl Rejection
- 99.3 %
- Optimum Rejection pH Range
- 7.0 – 7.5
- Outer Wrap
- Fiberglass
- Typical Operating Flux
- 7 – 11 GFD / 12 – 19 LMH
- Typical Operating Pressure
- 5516 kPa / 800 psi
See more parts in AD HR Series Seawater RO High Rejection Elements
Request a Quote
This part number is already on the request. Tell us how many you need and our specialists will come back to you.